SPONSORS
2024 ICRBE EXPO |
fuji WCS vs DNA alcohol
Posted by:
ernest sebastian
(---.fast.net.id)
Date: March 25, 2013 11:46AM
this is my third experience installing fuji SK2 with the WCS winding check
i always wipe out rod bond excess with clothes + DNA alcohol but it will resulting the paint become dull what are you using to wipe the glue excess specially on the WCS winding check? thanks Re: fuji WCS vs DNA alcohol
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: March 25, 2013 02:01PM
Ernest,
I would suggest that you install the Fuji SK2 and wipe off any excess glue. Then, place the WCS winding check and wrap the rod. There may be something special about the WCS winding check, but I always place the winding check afterwards and let the thread and thread fnish hold the check in place on the rod, rather than the reel seat glue. Roger Re: fuji WCS vs DNA alcohol
Posted by:
jim spooner
(---.dyn.centurytel.net)
Date: March 25, 2013 05:19PM
I use alcohol to clean all components with no problems. The WCS checks help reinforce the reel seat assembly and should be epoxied. Re: fuji WCS vs DNA alcohol
Posted by:
Eric MONTACLAIR
(---.fbx.proxad.net)
Date: March 26, 2013 01:53AM
Just don't use acetone with Fuji WCS winding check (don't ask me how I know). Re: fuji WCS vs DNA alcohol
Posted by:
ernest sebastian
(---.fast.net.id)
Date: March 27, 2013 08:53AM
Jim,
maybe we used different type of DNA, i've used common DNA that available here in indonesia Roger, that's great.i'll try it in my next build thanks Sorry, only registered users may post in this forum.
|