SPONSORS
2024 ICRBE EXPO |
Greensboro, NC
Posted by:
George Kerr
(---.lightspeed.gnbonc.sbcglobal.net)
Date: March 22, 2013 05:20PM
I am new to rod building. Are there any rod builders from the Triad area willing to share a little knowledge? Re: Greensboro, NC
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: March 22, 2013 06:21PM
here you can check and see who builds in your area
[www.tackleworks.org] or just wait and see who responds Bill - willierods.com Re: Greensboro, NC
Posted by:
Steve Gardner
(---.nc.res.rr.com)
Date: March 22, 2013 06:37PM
Don't know if there are any directly in Greensboro. But there are several around the area
here are a few J.P. Timberlake Tom Kirkman Robert Gueist I'm located down in Pinehurst area and would not mind sharing tips. But at the moment am so busy that I don't have the time. Maybe later in the year. The site Bill suggested might help, but not every one including myself lists themselves on that web site Re: Greensboro, NC
Posted by:
Tom Kirkman
(Moderator)
Date: March 22, 2013 07:31PM
Just off the top of my head, Buddy Owens and Matt Smith are also in Greensboro.
............... Re: Greensboro, NC
Posted by:
Wes Motsinger
(---.triad.res.rr.com)
Date: March 22, 2013 08:36PM
im in wallburg below winston salem Mot's Custom Rods and Reels Re: Greensboro, NC
Posted by:
George Kerr
(---.lightspeed.gnbonc.sbcglobal.net)
Date: March 23, 2013 05:34AM
Wes, I will contact you to discuss, and will contact Steve later.
Thanks for stepping up. Re: Greensboro, NC
Posted by:
George Kerr
(---.lightspeed.gnbonc.sbcglobal.net)
Date: March 23, 2013 08:09AM
Hi Wes,
Please send me your contact information or contact me kerrg@bellsouth.net 336 457-9319 Thanks George Sorry, only registered users may post in this forum.
|