SPONSORS
2024 ICRBE EXPO |
double foot casting guides
Posted by:
Wilburn Barron
(---.pools.spcsdns.net)
Date: February 15, 2013 02:16PM
What's the smallest sized casting guide they make in a doubled foot guide. I currently been using size 6. I was just curious if they go any smaller.
Thanks BJ Barron Re: double foot casting guides
Posted by:
Bill Sidney
(---.gci.net)
Date: February 15, 2013 04:20PM
normaly the smaller guides are for light to very light rodes so for th most part you will only get single foot in the smaller size I could be wrong but i don't think so Re: double foot casting guides
Posted by:
Col Chaseling
(---.lns3.cht.bigpond.net.au)
Date: February 15, 2013 04:29PM
Hi William,
Size 6 is usually the smallest. Don't know of any manufacturer that goes any smaller than that. ESFNEM Col Port Kembla, NSW Australia Re: double foot casting guides
Posted by:
Jeremy Johnson
(---.lightspeed.gdrpmi.sbcglobal.net)
Date: February 15, 2013 04:47PM
Im pretty sure Fuji makes 5 and 5.5 double foots. Call lance at swampland. Edited 1 time(s). Last edit at 02/15/2013 04:51PM by Jeremy Johnson. Re: double foot casting guides
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: February 15, 2013 04:52PM
i took a look around and found these
weather you can use them ?? [www.mudhole.com] Don't know what your building but Do you need double foot guides ?? Bill - willierods.com Edited 1 time(s). Last edit at 02/15/2013 04:55PM by bill boettcher. Re: double foot casting guides
Posted by:
Randolph Ruwe
(---.hsd1.wa.comcast.net)
Date: February 15, 2013 06:11PM
Just curious, whydo you want or need one smaller than a size 6? Re: double foot casting guides
Posted by:
Lance Dupre
(---.mycingular.net)
Date: February 15, 2013 09:40PM
BLCAG5 and 5.5. Perfect for micro guide builds. We have lots in stock. Re: double foot casting guides
Posted by:
Wilburn Barron
(---.pools.spcsdns.net)
Date: February 16, 2013 12:21AM
I was mainly just curious. The double foot guides are all the guys I build for or repair for want. I have only built a couple flipping stix. Size 5 I might just have to check those out. Re: double foot casting guides
Posted by:
Jay Lancaster
(---.hsd1.sc.comcast.net)
Date: February 16, 2013 11:49AM
Sort of like educating people on spiral rods...you may want to let these customers borrow a rod wrapped with single foot guides.
Micros, to me, just seem like an extreme effort to save weight...and running all that extra thread and epoxy just goes in the opposite direction of what you're trying to achieve. Build a rod and let them oh&ah over it then say, "take it and use it for a couple of weeks." Re: double foot casting guides
Posted by:
Wilburn Barron
(---.pools.spcsdns.net)
Date: February 18, 2013 09:46AM
I did let them borrow the two rods I built with the double foot #6 that's why they wanted them on there's when when I rewrapped there rods. This guys are rough on rods after a while the single foots beak off or the ring finally comes out.
They have got micros on some of there rods but they weren't a big fan of them. Weight is not a issue with them as long as its ballanced. Re: double foot casting guides
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: February 19, 2013 09:59AM
Fuji has several types in 5.5 double foot Bill - willierods.com Sorry, only registered users may post in this forum.
|