SPONSORS
2024 ICRBE EXPO |
Comments on new Rodmaker
Posted by:
Ken Finch
(204.45.65.---)
Date: February 05, 2013 04:44PM
Got the new copy today. Only had time to browse it. Three things come to mind off the bat. Great job on the lure grips! Now that's something you won't find on a factory rod! Saw the new ad for FUJI rod blanks. Hmmmm. This has my curiosity up for sure! Will be by the AR booth in Winston-Salem to check them out. Bill's article on shipping rods is pure genius. But I did have one question about the end caps he mentions. Are these the big heavy PVC fitting caps or something else? I didn't see the cap in the article photos so wasn't sure. Other than that it was a great idea that I'll use in the future. Great issue again. Re: Comments on new Rodmaker
Posted by:
Bill Colby
(---.t-n-media.de)
Date: February 05, 2013 06:07PM
The cap is in the photo but it’s hard to see. My apology. I do not have the camera equipment or the skill to take really good publication quality photos and the timetable was too short for me to ship everything to Tom for him to photograph the items there. I will try and put a photo of the style cap I recommend on the photo page this evening.
In the meantime what you want is the thin packaging type tube caps. Usually they are organge or blue and thin and pliable. The large, heavy, white PVC cap fittings create a heavy shoulder along the tube which can cause a hang up on shipping machinery. With the method outlined you do not need heavy end caps so I do not recommend using those. Again sorry that my photos were not good enough for this to be clear. Photography is not my field of expertise. Re: Comments on new Rodmaker
Posted by:
Barry Thomas Sr
(---.hsd1.nj.comcast.net)
Date: February 05, 2013 09:13PM
Also Called Inspection caps I believe.
BILL COLBY! ??? Edited 1 time(s). Last edit at 02/05/2013 09:13PM by Barry Thomas Sr. Re: Comments on new Rodmaker
Posted by:
Ken Finch
(---.)
Date: February 05, 2013 10:02PM
I looked at the photos again and can see it now. It was just to thin to really show up in the small photo. Thanks. All I needed to know. Re: Comments on new Rodmaker
Posted by:
Randolph Ruwe
(---.hsd1.wa.comcast.net)
Date: February 05, 2013 10:18PM
You guys must be on the East Coast, Haven't got the new issure here in WA state yet. Lucky You. Re: Comments on new Rodmaker
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: February 06, 2013 07:52AM
I make a lid out of newspaper Then tape side over to side 5 - 6 times Then around twice Then spray the tap just to keep the edges down get all my newspaper free Bill - willierods.com Sorry, only registered users may post in this forum.
|