I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

looking for a ferrule
Posted by: gary Marquardt (141.211.233.---)
Date: January 14, 2013 10:56AM

I'll post this on the wanted page also.
I'm in need of a chrome plated female only ferrule in 24/64

I've looked at my usual sources and all I see are too small or too big.
if anyone has one kicking around please let me know.
Thanks

Options: ReplyQuote
Re: looking for a ferrule
Posted by: Bill Sidney (---.gci.net)
Date: January 14, 2013 12:15PM

i don't know much about ferrule's but I think they are married an you might have to get the pair so they fit not sure but ?? I could br wrong more people will chme in on this i am sure

Options: ReplyQuote
Re: looking for a ferrule
Posted by: Phil Erickson (---.dsl.pltn13.sbcglobal.net)
Date: January 14, 2013 12:24PM

William is correct, they are paired. Getting a single 24/64 female ferrule does not mean that the inside diameter will fit your male ferrule.

Options: ReplyQuote
Re: looking for a ferrule
Posted by: gary Marquardt (141.211.233.---)
Date: January 14, 2013 12:27PM

I know they usually come in a pair. and if there is a pair our there I don't mine the extra piece. The part is going to be non-functional for a project I'm working on. i was hoping that someone had a trasher piece in their spare parts inventory.

Options: ReplyQuote
Re: looking for a ferrule
Posted by: bill boettcher (---.dyn.optonline.net)
Date: January 14, 2013 01:36PM

Golden Witch has them Females in your size
Swiss ?

Bill - willierods.com

Options: ReplyQuote
Re: looking for a ferrule
Posted by: gary Marquardt (141.211.233.---)
Date: January 14, 2013 05:00PM

Found it. I must have looked in the Mudhole catalog before coffee. didn't read where it said the sizes were in mm and not 64's. 9.5mm=3/8"
plus I bulked up my order to make it worthwhile.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster