SPONSORS
2024 ICRBE EXPO |
Bent Blank
Posted by:
Luis Morales
(---.bstnma.east.verizon.net)
Date: January 03, 2013 12:52PM
Have a Lamiglas GSB 132 1L and the tip has a slight curve at the tip along the opposite side of the spine. How normal is this, should I worry about it or take the blank back? Thanks Re: Bent Blank
Posted by:
Tom Kirkman
(Moderator)
Date: January 03, 2013 01:02PM
A gentle curve is fine and to be expected. A sharp crook is not normal and could be cause for concern.
............... Re: Bent Blank
Posted by:
Terry Turner
(---.hsd1.or.comcast.net)
Date: January 03, 2013 02:02PM
If the curve is gentle, you can orient the guides opposite of the curve and it should straighten it out nicely.
Terry Sorry, only registered users may post in this forum.
|