SPONSORS
2024 ICRBE EXPO |
9' for 9 Wt, 5 or 6-piece blank needed
Posted by:
Terry Turner
(---.hsd1.or.comcast.net)
Date: January 03, 2013 12:07PM
For all you salt water fly guys, I've been on the search for the above blank but all of the multi-piece (greater than 4-piece) blanks seem to stop at 8. My customer wants a better travel solution that fits in his suitcase and the 4-piece choices are a bit too long.
I've searched a number of locations without success so any help in locating such an animal would be greatly appreciated. Thanks! Terry Terry Turner Terry's Custom Rods Gladstone, Oregon Re: 9' for 9 Wt, 5 or 6-piece blank needed
Posted by:
Bill Hickey
(---.nys.biz.rr.com)
Date: January 03, 2013 07:29PM
CTS Affinity X blank is available in 5 or 6 piece for the 9wt. It isn't going to be cheap, but will easily compete with anything out there. Re: 9' for 9 Wt, 5 or 6-piece blank needed
Posted by:
Terry Turner
(---.hsd1.or.comcast.net)
Date: January 04, 2013 12:13PM
It would appear that CTS is about the ONLY supplier out there with a 5-6 piece 9 Wt blank available. This topic hasn't been flooded with replies as you can see.
Anybody know the CTS dealer(s) in the US? Thanks, Terry Re: 9' for 9 Wt, 5 or 6-piece blank needed
Posted by:
John E Powell
(168.169.226.---)
Date: January 04, 2013 12:45PM
If you check the CTS website, in the upper right corner there is a link to "find a distributor". Following that link, at the bottom of the page, they list two sources for the USA (however one is Canadian). There you go! Sorry, only registered users may post in this forum.
|