SPONSORS
2024 ICRBE EXPO |
TWIST THREAD
Posted by:
Doug Chadwick
(---.sub-70-196-11.myvzw.com)
Date: December 15, 2012 02:58PM
QUESTION- WOULD USING CP ON PRO- WRAP TWIST THREAD HOLD COLOR OR WOULD THE METALIC HAVE ISSUE WITH THE CP Re: TWIST THREAD
Posted by:
Steve Mcleod
(---.135.112.82.dyn.jtglobal.com)
Date: December 15, 2012 03:32PM
I've not used pro wrap twist thread, but i would imagine just like the gudebrod trimar threads with a twist of metallic - it will work fine - no issues. Jersey, Channel Islands. (U.K.) Edited 1 time(s). Last edit at 12/15/2012 03:34PM by Steve Mcleod. Re: TWIST THREAD
Posted by:
Ken Preston
(---.hsd1.md.comcast.net)
Date: December 15, 2012 04:18PM
CP has no effect on metallic - so, no there will be no issue Re: TWIST THREAD
Posted by:
Doug Chadwick
(---.sub-70-196-11.myvzw.com)
Date: December 15, 2012 05:30PM
THANKS FOR THE HELP. Re: TWIST THREAD
Posted by:
Charles Clayton
(---.ldcz1.cht.bigpond.net.au)
Date: December 16, 2012 02:26AM
Steve Mcleod Wrote:
------------------------------------------------------- > I've not used pro wrap twist thread, but i would > imagine just like the gudebrod trimar threads with > a twist of metallic - it will work fine - no > issues. I would agree total however the bullard twist is a bit different you definitely need CP, mine went totally black with straight epoxy. Regards Charles Sorry, only registered users may post in this forum.
|