I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Comments deleted
Posted by: John E Powell (168.169.226.---)
Date: December 12, 2012 01:45PM

Comments deleted



Edited 1 time(s). Last edit at 09/20/2016 05:41PM by John E Powell.

Options: ReplyQuote
Re: non-collinearly installed front grips with conventional reels
Posted by: Jim Upton (---.lsanca.fios.verizon.net)
Date: December 12, 2012 03:53PM

Yes, if I recall correctly there was a device into which the rod blank was fit, much like a unibutt with an off set fore grip. I don't remember what the name was but it was around some years ago.

Options: ReplyQuote
Re: non-collinearly installed front grips with conventional reels
Posted by: Barry Thomas Sr (---.hsd1.nj.comcast.net)
Date: December 12, 2012 04:40PM

Look here, [www.mudhole.com]

Options: ReplyQuote
Re: non-collinearly installed front grips with conventional reels
Posted by: Tom Kirkman (Moderator)
Date: December 12, 2012 04:50PM

What Jim is referring to was, I think, called "Z-Handle."

...........

Options: ReplyQuote
Re: non-collinearly installed front grips with conventional reels
Posted by: John E Powell (---.buffalo.res.rr.com)
Date: December 12, 2012 04:53PM

Comments deleted



Edited 1 time(s). Last edit at 09/20/2016 05:41PM by John E Powell.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster