I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Threadmaster cap size
Posted by: kevin gross (---.static.izoom.net)
Date: October 30, 2012 10:58PM

I just bought an 8OZ Threadmaster high build finish and want to get some Yorker style caps. would any of you know what size caps i need to buy?

Kevin Gross
Many men will spend their whole life wondering if they made a difference. Marines dont have that problem - Ronald Regan

Options: ReplyQuote
Re: Threadmaster cap size
Posted by: Don O'Neil (---.dhcp.asfd.ct.charter.com)
Date: October 31, 2012 10:38AM

Kevin,
My 8oz TM has flat top caps, not the pointed pour tops. If your bottles have flat tops all that you need to do is drill a small hole in the cap so that the flex coat syringes fit tightly into the hole. No need to chase down the Yorker caps.

Don

Options: ReplyQuote
Re: Threadmaster cap size
Posted by: Bill Eshelman (---.skylan.net)
Date: October 31, 2012 10:51AM

Hole size 5/16th, I think.

Bill

Ohio Rod Builders

Canton, Ohio

Options: ReplyQuote
Re: Threadmaster cap size
Posted by: Bill Ballou (---.hsd1.tn.comcast.net)
Date: October 31, 2012 11:50AM

Right on Bill--5/16 hole will make syringe snug and no mess.

Options: ReplyQuote
Re: Threadmaster cap size
Posted by: Phil Erickson (---.dsl.pltn13.sbcglobal.net)
Date: October 31, 2012 01:14PM

The "yorker style" cap is NOT the type you insert syringes into! They are the pointed style that have a small removable cap on the tip.

If I read his post correctly that is what he is seeking.

Options: ReplyQuote
Re: Threadmaster cap size
Posted by: Scott D parsons (205.244.119.---)
Date: October 31, 2012 01:40PM

They are 24mm caps

Scott Parsons
919-900-8998
[www.roddancer.com]
[www.fishhawkthreads.com]

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster