SPONSORS
2024 ICRBE EXPO |
G Loomis rod blanks
Posted by:
Chad Grand
(---.dynamic.mtsallstream.net)
Date: October 15, 2012 06:15PM
Is there anyplace that still sell G Loomis rod blanks? Re: G Loomis rod blanks
Posted by:
Don Morse
(---.pools.spcsdns.net)
Date: October 15, 2012 06:19PM
Nope, loomis no longer supplies blanks for sale. Imo check out north fork or mhx for similar feeling blanks ______________________________________ Super Tight Lines......Don Re: G Loomis rod blanks
Posted by:
Chad Grand
(---.dynamic.mtsallstream.net)
Date: October 15, 2012 06:20PM
Damn....ok thanks will check them out. Re: G Loomis rod blanks
Posted by:
Phil Erickson
(---.dsl.pltn13.sbcglobal.net)
Date: October 15, 2012 06:20PM
G Loomis quit selling blanks a couple of years ago. If really lucky you might some stashed in dealer inventories, will take some searching on your part. Re: G Loomis rod blanks
Posted by:
Chad Grand
(---.dynamic.mtsallstream.net)
Date: October 15, 2012 06:30PM
ok thanks guys appreciate the info. Re: G Loomis rod blanks
Posted by:
Hydra Fishing, LLC
(---.aik.sc.atlanticbb.net)
Date: October 15, 2012 08:21PM
What are you looking for? I have access to some but it's a very limited stock. Drop me an email. Hydra Fishing, LLC Online: [www.hydrafishing.com] Facebook: [www.facebook.com] Email: info@hydrafishing.com Re: G Loomis rod blanks
Posted by:
Brandon Gay
(---.rsvlcmta01.rlvlar.lr.dh.suddenlink.net)
Date: October 15, 2012 08:44PM
Fishing Tackle Unlimited had some a few months ago. You may give Terry a call. They may not be listed on their website. Re: G Loomis rod blanks
Posted by:
Capt Neil Faulkner
(---.dyn.optonline.net)
Date: October 16, 2012 08:05AM
Hi,
I have three (3) of the G Loomis 84-16's. 16 # class, very sensitive, 4-6-8 oz sinker loads and make fantastic sticks for fishing around Long Islands inshore waters for fluke, seabass and porgys. Capt Neil Faulkner Re: G Loomis rod blanks
Posted by:
Randolph Ruwe
(---.hsd1.wa.comcast.net)
Date: October 16, 2012 02:40PM
what type of blank are you looking for? Re: G Loomis rod blanks
Posted by:
Jean Scurtu
(---.hsd1.tx.comcast.net)
Date: October 17, 2012 10:29AM
You can buy blanks made by G.LOOMIS at www.northforkcomposites.com Re: G Loomis rod blanks
Posted by:
Karen Hapka - Bingham Ent.
(---.kc.res.rr.com)
Date: October 17, 2012 10:48AM
Gary Loomis is the designer of North Fork Composite rod blanks. He is no longer associated with G.Loomis/Shimano.
North Fork Composites blanks are sold by Anglers Workshop and Bingham Enterprises. Karen Hapka Bingham Enterprises Binghamenterprises@kc.rr.com Re: G Loomis rod blanks
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: October 17, 2012 03:30PM
On that same vein.
I have built up some rods using the North Fork Composites, supplied by Karen and I believe that they are as good as or better than any of the comparable Loomis blanks that I have built. Roger Re: G Loomis rod blanks
Posted by:
Jim Gamble
(---.res.bhn.net)
Date: October 17, 2012 03:49PM
roger wilson Wrote:
------------------------------------------------------- > On that same vein. > I have built up some rods using the North Fork > Composites, supplied by Karen and I believe that > they are as good as or better than any of the > comparable Loomis blanks that I have built. > > Roger x2 Re: G Loomis rod blanks
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: October 17, 2012 04:11PM
Better Bill - willierods.com Re: G Loomis rod blanks
Posted by:
Matthew Nelson
(---.wavecable.com)
Date: October 23, 2012 11:15PM
FYI, Gary Loomis is the owner operator of North Fork composites. Therefore his rods are his rods. If you like Gary Loomis products then buy North Fork Composites blanks and you will be assured that you have a Gary Loomis blank. Re: G Loomis rod blanks
Posted by:
Andrew Kumjian
(---.hr.hr.cox.net)
Date: December 16, 2012 08:44AM
i have looked at the northfork site and do not see anything comparable to the G-Loomis Pro Blue PBR963S. Does anyone know of a blank that is similar? AK Southside Custom Rods, LLC Chesapeake, VA. Re: G Loomis rod blanks
Posted by:
Capt Neil Faulkner
(---.dyn.optonline.net)
Date: December 16, 2012 11:36AM
Hi,
Call up North Fork Composites and ask them the question. Go direct to the source. I suspect that many of the folks posting here these days have never built on a G Loomis blank from the past. Capt Neil Faulkner Re: G Loomis rod blanks
Posted by:
Andrew Kumjian
(---.stj.spawar.navy.mil)
Date: December 17, 2012 08:06AM
thanks Capt. Sorry, only registered users may post in this forum.
|