SPONSORS
2024 ICRBE EXPO |
Need to find
Posted by:
Scott Kleppe
(---.230.55.67.dyn.southslope.net)
Date: October 09, 2012 10:31PM
I am looking for a pistol grip assembly, like one found on a cheap discount rod. I have a customer that want to have his sons pole fixed as a sentimental thing and the pistol grip was broken right at the reel hold down clamp. The grip I was told was rubber material and the rest plastic? Where can I find something like this?
Thanks! Scott SK Custom Rods American Tackle Pro Staff Fish now, cause you'll be dead for a long time. Re: Need to find
Posted by:
Robert A. Guist
(---.nmci.navy.mil)
Date: October 10, 2012 08:26AM
Hello Scott.
A photo would be helpful. Good hunting. Bob, New Bern, NC. Re: Need to find
Posted by:
Chris Richer
(131.137.243.---)
Date: October 10, 2012 08:53AM
I can think of two options.
1) Find a donor rod and remove and reuse the grip. 2) [www.mudhole.com] and spray bed liner / rocker panel paint on it. Chris Chris Richer Iroquois ON Re: Need to find
Posted by:
Don Morse
(---.dhcp.aldl.mi.charter.com)
Date: October 10, 2012 09:11AM
Scott, I sent you an email... ______________________________________ Super Tight Lines......Don Re: Need to find
Posted by:
Bill Eshelman
(---.lightspeed.bcvloh.sbcglobal.net)
Date: October 10, 2012 07:32PM
Scott, I may have one, send me a picture of it and you can have it s a match.
Duhhh, I will send you a pic in the morning of what I have. Bill Ohio Rod Builders Canton, Ohio Re: Need to find
Posted by:
Bill Eshelman
(---.lightspeed.bcvloh.sbcglobal.net)
Date: October 10, 2012 08:00PM
I sent you pictures of the 4 I have but your e-mail came back.
send me an e-mail : bkcustomrods@yahoo.com and I will try again Bill Ohio Rod Builders Canton, Ohio Re: Need to find
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: October 10, 2012 08:12PM
Check the big internet @#$%& site - @#$%&.
Do a search under cork handle. There are several handles like the one that you are looking for at a reasonable price. Good luck Roger Re: Need to find
Posted by:
Greg Foy
(---.dsl.snfc21.pacbell.net)
Date: October 11, 2012 12:35AM
Janns Netcraft has them Re: Need to find
Posted by:
Scott Kleppe
(---.230.55.67.dyn.southslope.net)
Date: October 11, 2012 03:00PM
Thank you for the help and replies. I have one coming from Mr Don Morse. You all are great and I am extremely grateful for the help.
Scott SK Custom Rods American Tackle Pro Staff Fish now, cause you'll be dead for a long time. Sorry, only registered users may post in this forum.
|