SPONSORS
2024 ICRBE EXPO |
butt guide
Posted by:
gaston arnold
(---.war.clearwire-wmx.net)
Date: October 03, 2012 03:20PM
i am about to embark on my first rod building mission and one thing i cant seem to find spelled out clearly is the criteria for the butt guide placement on a casting rod.when not loaded is the line supose to be centered in the guide? any help would be greatly appreciated ive done alot of searching and find more on spinning rods than anything else Re: butt guide
Posted by:
Tom Kirkman
(Moderator)
Date: October 03, 2012 05:11PM
I'd prefer that it be very close or lightly upon the bottom of the ring.
............... Re: butt guide
Posted by:
gaston arnold
(---.sub-174-253-208.myvzw.com)
Date: October 03, 2012 08:01PM
Thanks for the advice.id like to hear everyones theory Re: butt guide
Posted by:
Don Morse
(---.dhcp.aldl.mi.charter.com)
Date: October 04, 2012 10:30AM
Tom Kirkman Wrote:
------------------------------------------------------- > I'd prefer that it be very close or lightly upon > the bottom of the ring. > > ............... X2 ______________________________________ Super Tight Lines......Don Sorry, only registered users may post in this forum.
|