SPONSORS
2024 ICRBE EXPO |
St Croix blank
Posted by:
Judd Stanislawski
(---.docsis.hbci.com)
Date: August 21, 2012 08:06PM
I built a rod for a friend quite a few years ago that he really loves and now is asking for another with the same blank. For the life of me I can't seam to find my notes for that rod. However I do remember it was listed as a salt water blank from St Croix and was a one piece 7'6" blank. I have two St Croix numbers that it could have been one is GI76HF and the other is IC76MH. Is there anyone out there that has those numbers from an old catalog around the year 2001-2003 or so and if so which of the two part numbers listed above is the salt water model if any.
I don't see those numbers listed currently so if the blank is no longer available is there a current model with the same characteristics. Thanks for any help Judd S. Re: St Croix blank
Posted by:
Ray Zarychta
(---.ri.ri.cox.net)
Date: August 21, 2012 08:42PM
Try this link, looks like a catalog listing of older Croix rods and blanks, the GI76HF is listed under SCII GRAPHITE INSHORE SALTWATER ROD BLANKS (MATTE GREEN FINISH)
[members.tripod.com] Ray Zarychta Glastonbury, CT Re: St Croix blank
Posted by:
Judd Stanislawski
(---.docsis.hbci.com)
Date: August 21, 2012 08:53PM
That is the blank thanks!
Now can I still get that blank will be the next question? St Criox GI76HF heavy power fast action 15-30lb 1/2-2 oz 7'6" one piece, no telescoping. Any one have that blank? If so send me an e-mail with price. To jlstan@hbci.com Thanks, Judd S. Re: St Croix blank
Posted by:
Mark Gwynne
(---.lnse3.cha.bigpond.net.au)
Date: August 22, 2012 07:12AM
If you can't there is an SCIII very close to that which is probably better as well. The 3C76MHMF. Mud hole sells them. Re: St Croix blank
Posted by:
Robert A. Guist
(---.nmci.navy.mil)
Date: August 22, 2012 08:24AM
Hello Ray.
Thanks for the information (good Info for retro). Tight Wraps. Bob, New Bern, NC. Re: St Croix blank
Posted by:
Jim Gamble
(---.res.bhn.net)
Date: August 22, 2012 09:05AM
Have you looked at the St Croix SCII Inshore blank 2SW76HF? Re: St Croix blank
Posted by:
Judd Stanislawski
(---.docsis.hbci.com)
Date: August 22, 2012 04:44PM
Jim,
That was my first choice as of now. However I'm still looking. Thanks, all, for your help Judd S Sorry, only registered users may post in this forum.
|