SPONSORS
2024 ICRBE EXPO |
balsa wood veneer
Posted by:
Ted Metzger
(---.sb.sd.cox.net)
Date: June 29, 2012 06:54PM
I am looking for some balsa wood veneer with adhesive backing, something like the abalone veneer with adhesive backing. If anyone has a source for this I would appreciate a link to it. Thanks Re: balsa wood veneer
Posted by:
john timberlake
(---.triad.res.rr.com)
Date: June 29, 2012 07:00PM
try some of the hobby shops..they usually have a supply of balsa for cars and planes Re: balsa wood veneer
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: June 29, 2012 07:40PM
Ted,
If you don't have luck with the adhesive backing wood, you can always buy the bare wood and apply an adhesive film. Roger Re: balsa wood veneer
Posted by:
Steve Gardner
(---.nc.res.rr.com)
Date: June 30, 2012 12:04PM
Ted
You might not be interested, but there where two articles about working with Veneers (no adhesive backing) for rod handles and trim work in RodMaker mag some time back. Sorry, only registered users may post in this forum.
|