I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Pages: 12Next
Current Page: 1 of 2
Graphite rod tip break-repair
Posted by: Harry Bell (---.dhcp.aldl.mi.charter.com)
Date: June 12, 2012 08:18PM

I managed to brake the top of my St. Croix SCIII blank while fishing. My fault. The break is about 41/2 inches from the tip. I did a search looking for repair advice. I lerned one can use piano wire as a reinforcing rod inserted into the ends of the break. This sounds like a great fix. I need some advice concerning the piano wire. How do I order the correct wire? I mean, is piano wire graded by thickness or do I need to figure out somehow the key(s) the correct size of wire is used for. I think I can determine how thick of a wire I need,just need to know how to convey this to the person selling me the wire. Any ideas, people? Also, since I'm more comfortable in a hardware store, any sugesstions for an alternative wire with the required flexibility and thinness?
Gracias, as usual.

Harry T. Bell

Options: ReplyQuote
Re: Graphite rod tip break-repair
Posted by: Tom Kirkman (Moderator)
Date: June 12, 2012 08:21PM

No, using piano wire for that is absurd, to put it mildly. Try this instead:

[www.rodbuilding.org]

...................

Options: ReplyQuote
Re: Graphite rod tip break-repair
Posted by: bill boettcher (---.dyn.optonline.net)
Date: June 12, 2012 08:40PM

IT WAS NOT YOUR FAULT

call St Croix

Bill - willierods.com

Options: ReplyQuote
Re: Graphite rod tip break-repair
Posted by: Harry Bell (---.dhcp.aldl.mi.charter.com)
Date: June 12, 2012 08:49PM

Thanks, Tom. I got that info from a search of the rodboard, but I think you just saved me some considerable aggravation. While I've got your attention, Thank You for the articles in the new Rodmaker. I particularily appreciate the articles on feathers, Forhan locking wrap, and the one on surface prep. Can I ask, is there a way to ascertain the articles contained in past issues? I'm in my 1st year of subscription and realize I could find help I can't even imagine at this point, being a 1st year novice. Do you sell all past issues together for one price? Thanks, again and take care .Harry

Options: ReplyQuote
Re: Graphite rod tip break-repair
Posted by: Harry Bell (---.dhcp.aldl.mi.charter.com)
Date: June 12, 2012 08:52PM

I caught my braid behind my boat and did not release the bail which would have saved the rod. But if you think I should, I'll call them. It is one of my better builds. Casts a mile.

Options: ReplyQuote
Re: Graphite rod tip break-repair
Posted by: Harry Bell (---.dhcp.aldl.mi.charter.com)
Date: June 12, 2012 08:53PM

That last post was for Bill.

Options: ReplyQuote
Re: Graphite rod tip break-repair
Posted by: bill boettcher (---.dyn.optonline.net)
Date: June 12, 2012 09:00PM

It does not hert to try Tell them it was a BIG fish

Bill - willierods.com

Options: ReplyQuote
Re: Graphite rod tip break-repair
Posted by: Tom Kirkman (Moderator)
Date: June 12, 2012 10:02PM

Check the RodMaker website for CDs containing select combinations of articles. But no, not all can be had outside of individual issues.

...................

Options: ReplyQuote
Re: Graphite rod tip break-repair
Posted by: Col Chaseling (---.lns14.cht.bigpond.net.au)
Date: June 12, 2012 10:31PM

Hi Harry,
The cd's are excellent value for what you get but there's still nothing to compare to holding a glossy mag in your hands and being able to refer to it whenever needed.

ESFNEM Col
Port Kembla, NSW
Australia

Options: ReplyQuote
Re: Graphite rod tip break-repair
Posted by: Scott Kelly (---.mycingular.net)
Date: June 13, 2012 07:29AM

bill boettcher Wrote:
-------------------------------------------------------
> It does not hert to try Tell them it was a BIG
> fish


Actually fraud does "hert".

Options: ReplyQuote
Re: Graphite rod tip break-repair
Posted by: Harry Bell (---.dhcp.aldl.mi.charter.com)
Date: June 13, 2012 01:37PM

You got that right, Col.

Options: ReplyQuote
Re: Graphite rod tip break-repair
Posted by: Phil Erickson (---.dsl.pltn13.sbcglobal.net)
Date: June 13, 2012 05:16PM

Being dishonest to our suppliers/supporters is flat out wrong!!!

Options: ReplyQuote
Re: Graphite rod tip break-repair
Posted by: Chuck Mills (---.gctel.stellarllc.net)
Date: June 13, 2012 06:34PM

Phil Erickson Wrote:
-------------------------------------------------------
> Being dishonest to our suppliers/supporters is
> flat out wrong!!!

I agree!

And thanks Tom for busting this myth...

Posted by: Tom Kirkman (Moderator)
Date: June 12, 2012 07:21PM

No, using piano wire for that is absurd, to put it mildly.

_________________________________________
"Angling is extremely time consuming.
That's sort of the whole point." - Thomas McGuane

Options: ReplyQuote
Re: Graphite rod tip break-repair
Posted by: bill boettcher (---.dyn.optonline.net)
Date: June 13, 2012 07:21PM

And I am sure all of you are Honest when it comes time to pay your Taxes

Then again that is why many companieys have a Limited Lifetime Warrentee

Bill - willierods.com



Edited 1 time(s). Last edit at 06/13/2012 07:23PM by bill boettcher.

Options: ReplyQuote
Re: Graphite rod tip break-repair
Posted by: Harry Bell (---.dhcp.aldl.mi.charter.com)
Date: June 13, 2012 08:34PM

GO Bill!

Options: ReplyQuote
Re: Graphite rod tip break-repair
Posted by: bill boettcher (---.dyn.optonline.net)
Date: June 13, 2012 08:44PM

No one likes the Truth But we all do it

it is not how much you make -- it is how much you Keep

Bill - willierods.com

Options: ReplyQuote
Re: Graphite rod tip break-repair
Posted by: Chuck Mills (---.gctel.stellarllc.net)
Date: June 13, 2012 08:54PM

bill boettcher Wrote:
-------------------------------------------------------
> No one likes the Truth But we all do it


No we don't! And now we know we can't trust you! Funny how that works...

_________________________________________
"Angling is extremely time consuming.
That's sort of the whole point." - Thomas McGuane

Options: ReplyQuote
Re: Graphite rod tip break-repair
Posted by: bill boettcher (---.dyn.optonline.net)
Date: June 13, 2012 09:02PM

have a nice day

Bill - willierods.com



Edited 2 time(s). Last edit at 06/14/2012 06:54AM by bill boettcher.

Options: ReplyQuote
Re: Graphite rod tip break-repair
Posted by: Chuck Mills (---.gctel.stellarllc.net)
Date: June 13, 2012 11:20PM

bill boettcher Wrote:
-------------------------------------------------------
> BULLSHIT
>
> YOU CAN NOT TELL ME YOU ARE TOTALLY HONEST
>
> IF YOU SAY THAT YOU ARE FULL OF @#$%&
>
> i tell any one THE TRUTH iF THEY CAN NOT HANDLE IT
> -- LIFE IS A @#$%&
>
> Now go cry to Tom

Wait, you just admitted you lie, now you say you're telling the truth. Where I come from we call it integrity. Worth striving for, Bill.

_________________________________________
"Angling is extremely time consuming.
That's sort of the whole point." - Thomas McGuane

Options: ReplyQuote
Re: Graphite rod tip break-repair
Posted by: bill boettcher (---.dyn.optonline.net)
Date: June 14, 2012 07:43AM

Open your eyes Look around
Why does the goverment send millions of your dollars to countries that don;t even like us
Why does the two parties fight like little children - Instead of taking care of the people in this country
Why are there so many compainies doing buisness overseas Instead of HERE
Why are bills not going though the house that can make jobs and get this country going
Why are there so many Families living in the street

Go talk to you goverment about --Integrity Instead of ragging on me

Bill - willierods.com

Options: ReplyQuote
Pages: 12Next
Current Page: 1 of 2


Sorry, only registered users may post in this forum.
Webmaster