SPONSORS
2024 ICRBE EXPO |
Guide spacing with float reel/centerpin
Posted by:
Tom Lusis
(---.cpe.net.cable.rogers.com)
Date: June 04, 2012 09:46PM
Hello all,
Does anyone have any suggestions for guide placement on a float rod which will be using a centerpin reel? The blank is 11 feet in length - if that helps. Any feedback would be welcome. thanks, Tom. Re: Guide spacing with float reel/centerpin
Posted by:
Karry Batson
(---.wavecable.com)
Date: June 05, 2012 04:36PM
Not a 11 foot but here is a 11'6" Recipe that may help?
XST1382F Center Pin Rainshadow XST Salmon Steelhead Component Part Number Part Description Rod Blank Model # XST1382F-TC 11' 6" 2pc Lt 6-10lb Salmon/Steelhead Butt Cap: AF2SG 2" Aluminum Fighting Butt- Shiney Gunsmoke Reel Seat Shim: SHIM/16/SPIN Proof Board .590" OD 3.70" Length Reel Seat Body: BPSTG16 NPSTG Pipe seat textured (Threads down) Reel Seat Hood: GTT16C-SN-TC Hood w/cush Single Nut - True Light TiCH Trim: TRS16-TC X 2 Trim Ring for Spin Seat size 16 TiCH Fore Grip: FW7.375A-340 7.375 Midwest steelhead foregrip-A Grade Rear Grip: RG10A-345 10" Cork Rear Grip 'A' Winding Check: AWCCO 354-TC Lt TitCar Plated Winding Check .414" I.D. Hookeeper: TCHKS Small TiCH Hook Keeper Tip Top XTCPPCT06R04.0 ALPS SS316-RRD-P Top 06 TiCH Ring 4.0 Tube - TICH w/o Chrome Guides (see below for size and quantity) XPTCFCG ALPS SS316 - TiCH w/o Chrome Single Foot with TiCH Zirconium Ring RRD Guides (see below for size and quantity) XTCYTCG ALPS SS316 - Y Guide TiCH w/o Chrome Single Foot with TiCH Zirconium Thin Ring Guides (see below for size and quantity) XPTCVDTCG ALPS SS316 - TICH w/o Chrome Double Foot VD Frame TiCH Zirconium Thin Ring Guide order from the tip top Guide Guide Placement - In inches from the tip top 1st XPTCFCG06 4.25" 2nd XPTCFCG06 9" 3rd XPTCFCG06 14.25" 4th XPTCFCG06 20.25" 5th XPTCFCG07 27" 6th XTCYTCG07 34.5" 7th XTCYTCG07 43.25" 8th XTCYTCG08 52.5" 9th XTCYTCG10 62.125" 10th XTCYTCG10 72.625 11th XTCYTCG12 83.625" 12th XPTCVDTCG20 98" Karry Batson Batson Enterprises Inc. Ph: (877) 875-2381 Fax: (360) 683-3579 karry@batsonenterprises.com www.batsonenterprises.com Re: Guide spacing with float reel/centerpin
Posted by:
Tom Lusis
(---.cpe.net.cable.rogers.com)
Date: June 05, 2012 05:43PM
Hi Karry,
Thanks for the information. I'll use it as a starting point and tweak it for a longer blank. best, Tom. Sorry, only registered users may post in this forum.
|