SPONSORS
2024 ICRBE EXPO |
What Fuji guides
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: June 03, 2012 11:41AM
Could some one tell me what model Fuji guides are on a G Loomis SAR-1266-C GL-2 rod
Don't have it here with me This is a casting 2 pc 10 1/2' rod Thanks Bill - willierods.com Edited 1 time(s). Last edit at 06/03/2012 12:58PM by bill boettcher. Re: What Fuji guides
Posted by:
Jim Gamble
(---.res.bhn.net)
Date: June 03, 2012 09:40PM
Look at Fuji Hardloy and see if the photos match what you have. That is what they were using on GL2 series rods. Re: What Fuji guides
Posted by:
David Gilberg
(---.pghk.east.verizon.net)
Date: June 04, 2012 12:22AM
I have a factory Loomis 1266 Surf Spinning rod about 12 years old which has Fuji SIC Gunsmoke guides.
I would assume the casting version was equipped with Fuji SIC's as well. Re: What Fuji guides
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: June 04, 2012 07:58AM
Customer said the rings are black So I am thinking maybe Aconite ??
Or are they even Fuji ?? I can try to call them Think the rod is only a couple of years old ?? Bill - willierods.com Edited 1 time(s). Last edit at 06/04/2012 09:42AM by bill boettcher. Re: What Fuji guides
Posted by:
David Gilberg
(---.pghk.east.verizon.net)
Date: June 04, 2012 11:12AM
Bill,
The guides on my Loomis 1266S are4 indeed black. I called them Gunsmoke by mistake because the guides were dusty. Upon closer comparison I'm sure they are Alconites. Sorry for the error. Re: What Fuji guides
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: June 04, 2012 11:57AM
That sounds about right to what the customer said
Thanks David Called them up and was told the guides are Aluminum Oxide guides That is probably why the ring is black Bill - willierods.com Edited 1 time(s). Last edit at 06/04/2012 12:38PM by bill boettcher. Sorry, only registered users may post in this forum.
|