SPONSORS
2024 ICRBE EXPO |
Flexcoat Slip Clutch Question
Posted by:
Jess Brindisi
(---.washdc.fios.verizon.net)
Date: May 19, 2012 05:48PM
Can the Flexcoat slip clutch be tightened up? Seems on rods that have bigger guides, the clutch doesn't stick enough when turning on the dryer leaving the guides on the bottom while the motor is still turning....
Hope this makes sense. Re: Flexcoat Slip Clutch Question
Posted by:
John Lentz
(---.pools.spcsdns.net)
Date: May 19, 2012 08:07PM
I believe you can tighten the screw inside the cup with a flahead screwdriver to increase the slip tension. Re: Flexcoat Slip Clutch Question
Posted by:
Jess Brindisi
(---.washdc.fios.verizon.net)
Date: May 20, 2012 04:25PM
Yup...that did it. thanks for the heads up. Sorry, only registered users may post in this forum.
|