I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Epoxy ?
Posted by: Dave Wylie (---.lightspeed.rlghnc.sbcglobal.net)
Date: May 18, 2012 10:06AM

I have some Rod Bond epoxy that is several years old and wanted to know if it is still good to use this on handles & reel seats? TIA

Options: ReplyQuote
Re: Epoxy ?
Posted by: Tom Kirkman (Moderator)
Date: May 18, 2012 10:14AM

Yes, it is fine. If you find the resin is crystalized (hard or chucky) you can remove the lid and hit it in the microwave for a bit and it'll return to normal with no harm done.

..............

Options: ReplyQuote
Re: Epoxy ?
Posted by: Glenn McMurrian (---.bvtn.or.frontiernet.net)
Date: May 22, 2012 06:01PM

I should be fine as long as it is still mixable and not hard.

Glenn McMurrian

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster