I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Wood Turning Seminar Photos
Posted by: Tom Kirkman (Moderator)
Date: May 09, 2012 05:54PM

I just added some of the photos from this weekend's wood turning seminar to the blog.

[www.rodmakermagazine.com]

................

Options: ReplyQuote
Re: Wood Turning Seminar Photos
Posted by: David Gilberg (---.pghkny.east.verizon.net)
Date: May 10, 2012 02:03PM

The seminar looks great and was probably even better!
I wish I had been able to attend.
Any chance this will be held again?

Options: ReplyQuote
Re: Wood Turning Seminar Photos
Posted by: Tom Kirkman (Moderator)
Date: May 10, 2012 02:47PM

That information is in the blog entry.

..............

Options: ReplyQuote
Re: Wood Turning Seminar Photos
Posted by: kevin knox (---.baybroadband.net)
Date: May 10, 2012 06:41PM

Did everyone leave with the fingers that they arrived with?

Kevin Knox
ANGLER'S ENVY CUSTOM RODS
QUEEN ANNE, MD 21657
#_#_#_#_#
www.anglersenvy.com

Options: ReplyQuote
Re: Wood Turning Seminar Photos
Posted by: Tom Kirkman (Moderator)
Date: May 10, 2012 07:56PM

Oh yes. There was no fumbling. These folks got the proper instruction and were turning like pros in minutes.

.................

Options: ReplyQuote
Re: Wood Turning Seminar Photos
Posted by: David Gilberg (---.pghkny.east.verizon.net)
Date: May 10, 2012 08:13PM

That's great news. If you have another seminar in the Fall you can count me in!
David Gilberg

Options: ReplyQuote
Re: Wood Turning Seminar Photos
Posted by: kevin knox (---.baybroadband.net)
Date: May 12, 2012 06:50AM

Is fumbling the correct term? I always thought the correct term was "timberlaking".

Kevin Knox
ANGLER'S ENVY CUSTOM RODS
QUEEN ANNE, MD 21657
#_#_#_#_#
www.anglersenvy.com

Options: ReplyQuote
Re: Wood Turning Seminar Photos
Posted by: Billy Vivona (---.nycmny.fios.verizon.net)
Date: May 12, 2012 07:59AM

BRUTAL!

Options: ReplyQuote
Re: Wood Turning Seminar Photos
Posted by: kevin knox (---.baybroadband.net)
Date: May 12, 2012 11:19PM

LOL! Its all in good fun. I think anyway. I better watch my butt when I am driving in NC in the future.....

Kevin Knox
ANGLER'S ENVY CUSTOM RODS
QUEEN ANNE, MD 21657
#_#_#_#_#
www.anglersenvy.com

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster