SPONSORS
2024 ICRBE EXPO |
Spinning rods and CCS
Posted by:
Terry Kirk
(---.ks.ks.cox.net)
Date: March 29, 2012 11:44PM
For those of you who are using the CCS system of measurement, has anyone ran across a blank currently produced that falls within an ERN of 9.83 to 10.63 and an AA of 78 to 82 and 6 foot 6 inches to 7 foot long 1pc spinning rod? Re: Spinning rods and CCS
Posted by:
rick sodke
(---.vc.shawcable.net)
Date: March 30, 2012 10:13AM
The only spinning blanks I measured were 7' AmTak Matrix Green/Black 2pc blanks
AMSP843-2 rated 1/8-3/8oz, 4-10lb test. ERN=12.4-13.1 AA = 75-76 I would think that there is a blank that meets your requirements but don't have that info. Re: Spinning rods and CCS
Posted by:
Steve Hartzell
(---.dsl.hstntx.sbcglobal.net)
Date: March 30, 2012 12:24PM
I've just downloaded the information about the Common Cents System and quckly scanned thought it and it seems to deal with fly rods. Is the CCS applicable to all blanks? I build primarily casting and spinning rods. Re: Spinning rods and CCS
Posted by:
David Dosser
(---.columbus.res.rr.com)
Date: March 30, 2012 01:13PM
It measures all rods. It doesn't matter what kind of rod it is. David Dosser Coshocton, OH Re: Spinning rods and CCS
Posted by:
Tom Kirkman
(Moderator)
Date: March 30, 2012 01:16PM
The CCS measures power, action and speed. It has no idea what your blank may have been made for what you intend to use it for. Nor does it care.
........... Re: Spinning rods and CCS
Posted by:
Jon Bial
(173.240.245.---)
Date: March 30, 2012 04:16PM
Label Power Action Lure Wt Line Wt Tip Butt Weight ERN AA
FW 602-1 (SM) Light Mod-Fast 1/32-1/8 1-4 4.2 0.342 1.11 9.80 70.80 FW 702-1 (IM) Light Ex-Fast 1/16-5/16 4-8 4.3 0.401 1.36 10.23 72.70 We just finished CCS data on most of our blanks. Jon Re: Spinning rods and CCS
Posted by:
Jon Bial
(173.240.245.---)
Date: March 30, 2012 04:16PM
Opps, double post. Sorry! Edited 1 time(s). Last edit at 03/30/2012 04:17PM by Jon Bial. Re: Spinning rods and CCS
Posted by:
rick sodke
(---.pmc-sierra.bc.ca)
Date: March 30, 2012 04:37PM
Jon, Who is we? Re: Spinning rods and CCS
Posted by:
Tom Kirkman
(Moderator)
Date: March 30, 2012 04:41PM
North Fork Composites. Link is to the left.
.......... Sorry, only registered users may post in this forum.
|