SPONSORS
2024 ICRBE EXPO |
SK2 Rear grip
Posted by:
Ron Flowers
(---.dsl.rcsntx.swbell.net)
Date: March 28, 2012 08:34AM
Does anyone know if the tenon on the rear grip (split grip) for the SK2 will fit the ACS seat? I know I can cut it off but was hoping it would be a good match. Thanks! Re: SK2 Rear grip
Posted by:
Jim Ising
(---.dyn.centurytel.net)
Date: March 28, 2012 09:35AM
No, the ACSM seat has no cork split grip at present. Anglers Resource will be stocking one in about 60 days. Re: SK2 Rear grip
Posted by:
Bill Stevens
(---.br.br.cox.net)
Date: March 28, 2012 12:52PM
EVA and Cork Split Grip Sets With Tenon To Match ACS seats available for immediate shipment:
[www.swamplandtackle.com] Re: SK2 Rear grip
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: March 28, 2012 05:26PM
If you have a drill - you can make your own grips Bill - willierods.com Re: SK2 Rear grip
Posted by:
Matt Davis
(---.fergus.prtel.com)
Date: March 29, 2012 05:46PM
The ID of the SK2 at the rear is significantly under that of the ACS or ECS.
So, the tenon would go in the ACS, but it wouldn't "fit" the ACS. ........................................... Better to have and not need than to need and not have. Re: SK2 Rear grip
Posted by:
Ron Flowers
(---.dsl.rcsntx.swbell.net)
Date: March 30, 2012 09:18AM
Thanks for the replies.....will go another way. Sorry, only registered users may post in this forum.
|