SPONSORS
2024 ICRBE EXPO |
Michigan Rodbuilder "Roundup"
Posted by:
Mike Barkley
(---.nap.wideopenwest.com)
Date: March 26, 2012 12:10AM
The 1st MRB Roundup was a whopping success. I have posted some pix[www.rodbuilding.org] We had 25 builders who bought a lot of great rods for "Show & Tell", Visual Wrap presentation by Rich Kendall,, Bamboo repair/restoration by Gary Marquardt and all you wanted to know about creating unique/creative decals on an ink jet printer by Mike Barkley & Mick Danek, along with a LOT of tips, tricks and knowledge being exchanged!! Not to mention a TON of great food!
Thanks to GREAT support from the industry, we had some great door prizes to hand out! Also want to congratulate Don Morse, who's wife went into labor that morning with Landon Donald Morse! The guy that put all the time/energy into putting this together wasn't able to make it so we'll just have to have another one!! Any of you guys that have never attended a local gathering, make it HAPPEN. They are great. I attend them in Chicago and Canton, OHio and they are great! Thanks to Billy Vivona and the NERB's for gettingt this whole local gathering concept started!! Mike (Southgate, MI) If I don't want to, I don't have to and nobody can make me (except my wife) cuz I'm RETIRED!! Edited 1 time(s). Last edit at 03/26/2012 01:11AM by Mike Barkley. Re: Michigan Rodbuilder "Roundup"
Posted by:
JIM MOWL
(---.sub-75-219-35.myvzw.com)
Date: March 26, 2012 01:03AM
Thanks Don for all the hard work. I was hoping I could tell you that in person. Congratulations on the newest addition to the family. Thanks also to Mike Barkley for taking the reins in Don's absence. You did a great job Mike! Can't wait to do it again. Edited 1 time(s). Last edit at 03/26/2012 09:17AM by JIM MOWL. Re: Michigan Rodbuilder "Roundup"
Posted by:
Bill Eshelman
(---.neo.res.rr.com)
Date: March 26, 2012 02:08AM
Congratulations to Don and Mike for a great gathering. Rod bulders everywhere are eager to learn all they can, and it sounds like you guys did a good job, Congrats on the baby too.
Bill Ohio Rod Builders Canton, Ohio Re: Michigan Rodbuilder "Roundup"
Posted by:
Don Morse
(204.80.212.---)
Date: March 26, 2012 06:10AM
A HUGE THANK YOU TO Mike Barkley for taking over in my absence. I have been getting tons of emails and phone calls from everyone telling me what a great time was had by all. I think we have a new tradition in the Great Lakes State.
Landon's Video ______________________________________ Super Tight Lines......Don Re: Michigan Rodbuilder "Roundup"
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: March 26, 2012 08:36AM
Congratulations Bill - willierods.com Sorry, only registered users may post in this forum.
|