SPONSORS
2024 ICRBE EXPO |
Drop shot rod from north fork composites
Posted by:
david jones
(---.sub-174-252-159.myvzw.com)
Date: March 01, 2012 06:10PM
Was wanting to know if anybody has build a drop shot rod off of theses blanks and which one did you use they range from 165 to 230 any information would help Re: Drop shot rod from north fork composites
Posted by:
Eric MONTACLAIR
(---.fbx.proxad.net)
Date: March 02, 2012 01:11AM
I only put my hand on two blank DS6107 (IM) and DS761 (HM).
The DS761 is really X-Fast and seems light beside it's 7'6" lenght. The DS6107 is not as fast, more regular in the upper 1/3 section. One blank that impress me for drop shopping is the MHX DS821, a dream for 1/8 to 1/4oz weight. Really fast but sensitive and with enough power for me (using 3lb to 6lb tippet leader). Re: Drop shot rod from north fork composites
Posted by:
matthew jacobs
(---.122.31.71.static.ip.windstream.net)
Date: March 02, 2012 10:44AM
Eric MONTACLAIR Wrote:
------------------------------------------------------- > > One blank that impress me for drop shopping is the > MHX DS821, a dream for 1/8 to 1/4oz weight. > Really fast but sensitive and with enough power This blank and the DS8515 (high mod only) are quickly becoming my favorite spinning blanks. I know you asked about NFC but look into those 2 blanks and see what you think. Re: Drop shot rod from north fork composites
Posted by:
Karen Hapka - Bingham Ent.
(---.kc.res.rr.com)
Date: March 02, 2012 11:02AM
David,you asked about NFC e-mail me or contact Jon Bial at NFC for any questions you might want addressed. I am still offering show prices on any NFC blanks ordered now until Monday.
Karen Hapka Bingham Enterprises Binghamenterprises@kc.rr.com Sorry, only registered users may post in this forum.
|