I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

hook keeper question
Posted by: Jim Creed (---.int.bellsouth.net)
Date: February 18, 2012 06:28PM

not sure if its my hippy past catching up to me but i am drawing a blank on this one.

page 13 mudhole 2012 catalog. the hook keeper assortment, i am putting one on like on the bottom row horseshoe with offset. which way should the u turn go toward the butt or guides, i am thinking toward the butt but i swear i ain't sure.

your allowed to laugh, just give me your opinion, thanks.

Options: ReplyQuote
Re: hook keeper question
Posted by: Michael Danek (50.33.217.---)
Date: February 18, 2012 06:52PM

I think what you are referring to is a keeper with a simple double loop formed from wire. The double feet will be wrapped and that will leave an offset loop that can be wrapped two ways. The best way to wrap that is to wrap it so that the feet are pointing toward the tip. This allows the keeper to not only take a hook of a lure, but also to restrain a sinker due to its orientation. That allows a drop shot sinker to be restrained by the keeper. Do it the other way and you can't restrain anything exc a hook. If not clear, post again and I'll try harder.

Options: ReplyQuote
Re: hook keeper question
Posted by: Jim Creed (---.int.bellsouth.net)
Date: February 18, 2012 10:45PM

thats exactly what the customer wanted, the drop shot sinker part is what was throwing me off. thank you,
thought i was losing my grip for a minute

Options: ReplyQuote
Re: hook keeper question
Posted by: David Gilberg (---.pghkny.east.verizon.net)
Date: February 19, 2012 08:06AM

Check the photo of the hook keeper on a rod
next to the pic of the keeper in the Mudhole Catalog. It shows the orientation.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster