SPONSORS
2024 ICRBE EXPO |
Aglers Workshop Self centering chuck or the Alps Chuck
Posted by:
Glenn McMurrian
(---.hsd1.or.comcast.net)
Date: February 09, 2012 03:17PM
For those of you that have the Custom power wrapper by Anglers Workshop what is a better deal the self centering chuck on there more advanced wrapper or a Alp chuck added on to there lower end power wrapper. Re: Aglers Workshop Self centering chuck or the Alps Chuck
Posted by:
Tom Kirkman
(Moderator)
Date: February 09, 2012 06:52PM
If you're referring to the Taig chuck that comes on the Custom Power Wrap, that's a top end self-centering light duty chuck. Very good item.
However, the ALPs will do everything it claims to do. What are you going to be chucking? Rod blanks? If that's about it, then the ALPs is certainly more than good enough. ................. Re: Aglers Workshop Self centering chuck or the Alps Chuck
Posted by:
Glenn McMurrian
(---.hsd1.or.comcast.net)
Date: February 09, 2012 07:08PM
Thread Wraps,EVA,Hypalon shaping,Thread Work which needs centering and epoxy or what ever else comes along or even cutting blanks......It is the self centering 3 footed chuck not the one that uses screws to connect to the blank. Glenn McMurrian Edited 3 time(s). Last edit at 02/09/2012 07:16PM by Glenn McMurrian. Re: Aglers Workshop Self centering chuck or the Alps Chuck
Posted by:
Tom Kirkman
(Moderator)
Date: February 09, 2012 07:20PM
Either will be fine, both will do what you want exceptionally well.
........... Re: Aglers Workshop Self centering chuck or the Alps Chuck
Posted by:
Glenn McMurrian
(---.hsd1.or.comcast.net)
Date: February 09, 2012 07:23PM
Thanks Tom Sorry, only registered users may post in this forum.
|