SPONSORS
2024 ICRBE EXPO |
Rod Drying Motor Wont Shut Off on PB Lathe?
Posted by:
Gabe Nakash
(---.nyc.res.rr.com)
Date: February 09, 2012 08:52AM
My drying motor on my Pac Bay Lathe wont turn off.... It keeps spinning and spinning and spinning. Nothing but problems with this lathe. Dont mean to bash it but, what on earth is going on? The only way it turns off is if unplug the entire thing. I can use the wrapping motor still, but its annoying having the rod drying motor spin.
Gabe Edited 1 time(s). Last edit at 02/09/2012 10:19AM by Gabe Nakash. Re: Rod Drying Motor Wont Shut Off on PB Lathe?
Posted by:
Phil Muck
(---.hfc.comcastbusiness.net)
Date: February 09, 2012 08:54AM
Sounds like the switch went bad. Re: Rod Drying Motor Wont Shut Off on PB Lathe?
Posted by:
Tom Kirkman
(Moderator)
Date: February 09, 2012 09:18AM
I feel sure that if you give Pacific Bay a call, they'll do whatever is necessary to get you a new switch for the dryer portion.
................ Re: Rod Drying Motor Wont Shut Off on PB Lathe?
Posted by:
Geoff Staples
(---.olypen.com)
Date: February 09, 2012 10:47AM
Mr. Nakash,
I haven't heard of this particular issue before with the lathe. We would be very interested in getting the part back for evaluation. Just give us a call and we'll get a return authorization set up for you asap. 800-447-0089. Thanks. -The Batson TEAM BatsonEnterprises.com Re: Rod Drying Motor Wont Shut Off on PB Lathe?
Posted by:
Gabe Nakash
(---.nyc.res.rr.com)
Date: February 09, 2012 11:14AM
Geoff, I would love to give you a call but the problem is that I have come down with a case of strep throat and my voice sounds like a scratchy record. Thats the only reason I'm on the computer today, and decided to post.
Can we take this over email? Or maybe i can call another time? Thanks for being considerate. ------------------ Gabe (N.E.R.B.S Mascot) Re: Rod Drying Motor Wont Shut Off on PB Lathe?
Posted by:
Geoff Staples
(---.olypen.com)
Date: February 09, 2012 11:34AM
Mr. Nakash,
Either option work for us. If you would like to send an email I can be contacted at info@fishpacbay.com. Get well soon. -The Batson TEAM BatsonEnterprises.com Re: Rod Drying Motor Wont Shut Off on PB Lathe?
Posted by:
Gabe Nakash
(---.nyc.res.rr.com)
Date: February 09, 2012 11:41AM
Email sent. ------------------ Gabe (N.E.R.B.S Mascot) Re: Rod Drying Motor Wont Shut Off on PB Lathe?
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: February 09, 2012 02:30PM
Gabe,
You also can just go to your local hardware store and pick up a $3 on off toggle switch and save the hassle of switch return and replacement. If you were close, I would give you one from my spare parts box. Roger Re: Rod Drying Motor Wont Shut Off on PB Lathe?
Posted by:
Fred Yarmolowicz
(---.hsd1.nj.comcast.net)
Date: February 09, 2012 10:16PM
That lathe uses a 3 position switch.cI believe the proper terminology is double pole double throw switch. An on off switch will not allow you to select which motor you want to use. Freddwhy (Rapt-Ryte) Re: Rod Drying Motor Wont Shut Off on PB Lathe?
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: February 10, 2012 06:06AM
If you need a three position switch, then just go go your local hardware store and pick up a double pole double throw toggle switch from your local hardware store for $6. Home Depot also has these swithes for about $6.
Good luck Roger Edited 1 time(s). Last edit at 02/10/2012 06:07AM by roger wilson. Sorry, only registered users may post in this forum.
|