SPONSORS
2024 ICRBE EXPO |
Michigan Pier Fishing
Posted by:
Seth Holt
(---.dhcp.aldl.mi.charter.com)
Date: February 07, 2012 08:22PM
I have idea's about what makes a good Michigan Pier fishing rod. I am interested to hear other idea's. Please post your best idea's for this type of rod. Re: Michigan Pier Fishing
Posted by:
Don Morse
(99.150.139.---)
Date: February 07, 2012 10:58PM
what is your target species? ______________________________________ Super Tight Lines......Don Re: Michigan Pier Fishing
Posted by:
George Forster
(---.hsd1.co.comcast.net)
Date: February 08, 2012 12:00AM
You are probably tossing 3/4 oz Little Cleos to Kings, Cohos, Browns, and Steelhead. If you're lucky, you might hook into a 20 pounder (Chinook). I used to fish the Milwaukee side, years ago, and I always wanted more distance. If I was building a rod today, for that purpose, I would check out the Batson IST 1025 George Forster Fort Collins, CO Re: Michigan Pier Fishing
Posted by:
JIM MOWL
(---.stat.centurytel.net)
Date: February 08, 2012 10:33AM
I have a Lamiglas flyrod, 10'6" 8/9 WT blank I built spinning style in 1988 that I used for everything steelheading/salmon. It casted 3/8 oz Cleos a country mile, Used to use 3/8 slip sinkers and spawn with floats in the bag, put the rod in a holder, open the bail and stuck the line under a rubber band on the butt section. Bottom bounced spawn in the rivers. Used it two years ago with a borrowed centerpin reel to see if I wanted to pursue that method. It is a great all around rod. Never saw an advantage to those broom sticks a lot of people used to use on the piers. It sounded like somebody playing the washboard when they would cast that heavy line through the guides. I like the lighter action rod, lighter line and lighter lures. The first salmon I caught, 23lbs, was on a fiberglass 6'6" department store rod and 10lb test off the Frankfort pier in the early 80's. Edited 1 time(s). Last edit at 02/09/2012 01:29PM by JIM MOWL. Re: Michigan Pier Fishing
Posted by:
Larry Grimm
(---.proxy.aol.com)
Date: February 08, 2012 10:41AM
I would use a 7' light action fast taper spin rod with 4-6 Lb. line 1/4 - 3/8 oz roostertails , silver spinner white tail , or blue/silver K-O or Lil' Cleo Spoons the slower retreive the better , hook 'em and hang on ! ! ! Good Luck ! Larry Re: Michigan Pier Fishing
Posted by:
Russell Brunt
(165.214.14.---)
Date: February 08, 2012 12:26PM
From what is being said a hot shot rod sounds perfect. Russ in Hollywood, FL. Re: Michigan Pier Fishing
Posted by:
Phil Ewanicki
(---.135.188.72.cfl.res.rr.com)
Date: February 08, 2012 12:59PM
The principles of physics predict the longer the rod [until you run out of muscle] the greater the casting arc, thus the greater the speed at the end of the arc and the greater the speed the longer the cast. You must decide whether distance, portability, style or "feel" is your first priority. There are several nine, ten, and even eleven foot blanks with a "sweet spot" in the 3/4 - 1 ounce range. Re: Michigan Pier Fishing
Posted by:
justin keithley
(---.dhcp.aldl.mi.charter.com)
Date: February 08, 2012 08:02PM
agree with russell. i only fish the piers in a boat... and for bass.... but do catch the occasional steelhead and salmon on purpose... i'd think 7'6" HS blank would be ideal for the peirs around here. Regards, -Justin Re: Michigan Pier Fishing
Posted by:
Michael Danek
(50.42.153.---)
Date: February 09, 2012 06:25PM
Phil has it right, get the longest rod that will load correctly with the weight you want to cast. You don't want a noodle rod to cast the long distances that I think you are talking about with
"" Michigan piers." If you are to be casting 3/8 to 1 oz spoons or similar, the Batson 9 foot spin rod blanks will do it very well. Phil's explanation is correct as long as you understand that the rod has to have the power to make the tip accelerate properly with the weight of the lure. Noodle rods of long length, like 10-12 feet, will not do this with most lure weights. You have to understand the loading of the rod. Re: Michigan Pier Fishing
Posted by:
Seth Holt
(---.dhcp.aldl.mi.charter.com)
Date: February 12, 2012 07:24PM
Thank you for your idea's. Yes this is Michigan Pier's and I typically use a noodle rod as I do fish from the Pier itself. 11, 6 is my prefered length. The reason for the length is because the Piers are typcally lined with large rocks and the extra lenght allows the ability to get over them. Shorter rods don't do this. I have used this type of rod for both small fish. Lake perch and such, and also for Steelhead and Lake trout. I have caught a few salmon as well on these types of rods. I use 4 pound test line with this rod as I find that the rod will take most of the action. LIke a shock absorber. It seems to work well for me. I am always considering possible better idea's and was interested in your suggestions. Sorry, only registered users may post in this forum.
|