SPONSORS
2024 ICRBE EXPO |
are the mhx hi mod worth the cost
Posted by:
Dan Shannon
(---.lightspeed.ftwotx.sbcglobal.net)
Date: January 17, 2012 10:54PM
i am an semi new rod builder and have used some regular mhx blanks and they aren't sensitive enough. So are the hi mods any better or should i stick to the regular ones.
if there are any other blanks that are under $110 and are better than the hi mods pleas tell me. thanks Re: are the mhx hi mod worth the cost
Posted by:
lorenzo tellez
(---.hsd1.il.comcast.net)
Date: January 17, 2012 11:00PM
I have built like 5 hi mod, MHX rod blanks and have built the regular MHX's also, and have fished them, as more sensitive then the regular , I think they are since they are more lighter and with that I feel that they are more sensitive, But I guess you will have to find that out for yourself, what I think is more sensitive might not be for you, Tight lines! Re: are the mhx hi mod worth the cost
Posted by:
Dan Shannon
(---.lightspeed.ftwotx.sbcglobal.net)
Date: January 17, 2012 11:08PM
Thanks a ton!
I will probably try them out. Re: are the mhx hi mod worth the cost
Posted by:
Eric MONTACLAIR
(---.fbx.proxad.net)
Date: January 18, 2012 12:53AM
For me, considering they comme with a free rod bag, the cost is good (as the standard version).
They are lighter. The finish is a little on the down side vs standard (the sanding could have been done with more précision on my blank). Edited 1 time(s). Last edit at 01/18/2012 12:54AM by Eric MONTACLAIR. Re: are the mhx hi mod worth the cost
Posted by:
matthew jacobs
(---.122.31.71.static.ip.windstream.net)
Date: January 18, 2012 07:55AM
Yes, they are much more sensitive than the original series.
I've built quite a few of them and have been very impressed, as have my customers. Re: are the mhx hi mod worth the cost
Posted by:
Brent Boxall
(---.epbinternet.com)
Date: January 18, 2012 02:41PM
I built a split grip flippin' and pitchin' stick using the MHX HM-MB874-MHX blank and Fuji Titanium "K" Concept SiC Guides. With fluorocarbon line the sensitivity is NICE!!!!
It isn't a GLoomis GLX but is feels pretty slick. Re: are the mhx hi mod worth the cost
Posted by:
Mike Thompson
(---.triad.res.rr.com)
Date: January 18, 2012 02:51PM
Its the best buy out there for your money. I love the finish, its just what i want on a blank. You usually get what you pay for..on the HM's perhaps more! Re: are the mhx hi mod worth the cost
Posted by:
Dan Shannon
(---.lightspeed.ftwotx.sbcglobal.net)
Date: January 18, 2012 09:54PM
thanks for your help. Sorry, only registered users may post in this forum.
|