SPONSORS
2024 ICRBE EXPO |
Reel fits seat? level wind ?
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: January 08, 2012 12:40PM
Building a rod on a Hercules GTS 70 M Blank
Will be using a PacBay channel Lock seat [www.mudhole.com] Seat should fit the blank no problem - But will a Shimano TLD 25 - [www.tackledirect.com] - fit a 20 size seat looks like it will ?? The feet look thin and narrow Also this reel does not look like it has any level wind on it If not any one have any ideas on how to set up the butt guides for the reel I am thinking of maybe two around the + o - area of the top of the blank ?? hate to have the line build up on one side of the reel -- Going to try to get the reel to test it ?? Got 10 ring heavy Virtus guides and a 12 Thanks for any help Bill - willierods.com Edited 1 time(s). Last edit at 01/08/2012 12:44PM by bill boettcher. Re: Reel fits seat? level wind ?
Posted by:
Barry Thomas Sr
(---.hsd1.nj.comcast.net)
Date: January 08, 2012 01:20PM
Get in touch with Billy V of the Nerbs. He is a Dealer for those Blanks. He is the Man! Re: Reel fits seat? level wind ?
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: January 08, 2012 01:43PM
The seat will fit the blank ( be here tomorrow ) Will the reel fit the 20 seat I think so ?? Don't have the seat
Also reel having a Level Wind on it ??? Guide ideas on a Spiral guide placement Bill - willierods.com Re: Reel fits seat? level wind ?
Posted by:
wayne diduch
(---.cpe.net.cable.rogers.com)
Date: January 08, 2012 01:59PM
Hi Bill!!...Off topic, and i apologize for not getting back to you sooner [my Dad.. 83 is not well ] and i've been "Tangled" up...i can't get a hold of that Guy either..the Fella that wants the Split Grips...it's o.k though...i would'nt have the time now. But, thanks for the Heads up Bill...it is greatly appreciated. Cheers!!!...Wayne Re: Reel fits seat? level wind ?
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: January 08, 2012 02:11PM
That's OK
Now I feel bad cause I tried to some people work I could not Don't think do Did not mean to get you involved with a guy that did not know what he wanted Hope you Dad feels better Got a sister in the hospital also Any Comments On the guide placement ??? Thanks Bill - willierods.com Edited 1 time(s). Last edit at 01/08/2012 04:29PM by bill boettcher. Re: Reel fits seat? level wind ?
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: January 08, 2012 04:44PM
Bill,
Before gluing on the reel seat, get a reel that is of the type mentioned and check the fit on the reel seat. (Have the client of the rod, send you the reel that he wants to put on the rod) Before aligning any guides, put the reel on the blank with the guides wrapped but not coated. Put out a couple hundred feet of line on the floor and then reel in under light tension. See how the line fills on the reel. With a non line guide reel, the line should pretty well stack on the center, or run by itself from side to side. If you find that the line stacks on one side or the other, then rotate the butt guide until the line does center. Then, align other guides as needed. In particular, when doing spiral wraps, even with line guide reels, I have found that the line will stack on one side of the reel if I don't offset the first guide by 5-10 degrees - depending on the reel. Good luck REW Re: Reel fits seat? level wind ?
Posted by:
Charles Clayton
(---.ldcz1.cht.bigpond.net.au)
Date: January 08, 2012 04:52PM
The TLD 25 is a fair size reel, mines mounted on a 30 to 50 lb game rod, maybe have a look at one before you start building ? You can lob out a live bait but they are not really casting reels so no level wind as they were designed as a entry level game reel.
Charles Edited 1 time(s). Last edit at 01/08/2012 04:55PM by Charles Clayton. Re: Reel fits seat? level wind ?
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: January 08, 2012 06:08PM
Thanks for the info
I was thinking of finding a reel in one of the stores around me make sure it fits the seat Now I can glue it on Understand about the stacking he will go i would think about 150 - 200 feet down A lot of line to go back on the reel If i make it Spiral to the handle side but put the butt guide to the other side just a little If it stacks he can push the line with his thumb to make it go over ?? maybe I would be better with guides on top ?? Got to think about this Bill - willierods.com Re: Reel fits seat? level wind ?
Posted by:
James Bare
(50.105.27.---)
Date: January 09, 2012 08:48PM
Does it make a difference on how the butt guides are on the blank? Any big game casting reel like that tld you level the line with your thumb as you reel the line in, so why wouldnt you have the first guide dead center lined up with the reel seat and the reel? Re: Reel fits seat? level wind ?
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: January 10, 2012 07:06AM
here ya on the thumb
I am thinking the first butt guide at about 355 then the next at 0 then the spiral Easier to push the line over to the right then pull to the left Got to see how they line up when I set it up Bill - willierods.com Re: Reel fits seat? level wind ?
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: January 10, 2012 07:07AM
here ya on the thumb
I am thinking the first butt guide at about 355 then the next at 0 then the spiral Easier to push the line over to the right then pull to the left Got to see how they line up when I set it up Hercules blanks Don't Come with a Decal ??? Bill - willierods.com Sorry, only registered users may post in this forum.
|