I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Bob Dietz - Pattern Number 55
Posted by: Ron Beloff (---.disa.mil)
Date: January 06, 2012 12:34PM

Looking at Dale Clemens "Custom Rod Thread Art", I came across a pattern that I would like to build. It was Number 55 by Bob Dietz - "Four Arrows". If anyone has wrapped this pattern, could you please post photos? I think it would look great on a Breakaway Omega 10' 6" rod I am getting ready to build.

Appreciate any assistance,

Ron B

Ron Beloff

Options: ReplyQuote
Re: Bob Dietz - Pattern Number 55
Posted by: Billy Vivona (---.nycmny.fios.verizon.net)
Date: January 06, 2012 03:23PM

This was posted in The NERBs group on Facebook by Pedro: [www.facebook.com]

Options: ReplyQuote
Re: Bob Dietz - Pattern Number 55
Posted by: Milt deReyna (---.nc.res.rr.com)
Date: January 06, 2012 06:42PM

Here it is, laid out in Visual Wrap: [www.facebook.com]

Options: ReplyQuote
Re: Bob Dietz - Pattern Number 55
Posted by: Ron Beloff (---.hsd1.md.comcast.net)
Date: January 08, 2012 10:15AM

Thanks - That is one sweet looking wrap on that rod!

Ron B

Options: ReplyQuote
Re: Bob Dietz - Pattern Number 55
Posted by: Ron Beloff (---.phlapa.fios.verizon.net)
Date: December 15, 2020 04:16PM

Guys,

I'm having a problem reading the pattern as listed and also in Mr. López photo. How did the small white square between the two arrows on the patterns gets created? Was their a white underwrap done first?

I just can't seem to make sense how the white sauares between Clemons wrap or Mr. López's Four Arrows wraps is created.

Help!

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster