SPONSORS
2024 ICRBE EXPO |
Applying decal from Decal Connection
Posted by:
Jim Lens
(---.singnet.com.sg)
Date: December 15, 2011 11:39PM
Just ordered some peel-and-stick decals from Decal Connection. The instructions was indicating that a layer of epoxy MUST be applied before the decal can be paste on the rod.
Wondering can we paste the decal straight to the rod instead and what's the difference with and without a layer of epoxy? Does anyone knows the answer? Thanks. Jim Re: Applying decal from Decal Connection
Posted by:
Phil Erickson
(---.dsl.pltn13.sbcglobal.net)
Date: December 16, 2011 12:59AM
The rod generally is not smooth enough to eliminate the possibility of having air under the label. Even though the air is very slight, it usually manifests itself as a haze. The epoxy creates a very smooth (glass like) surface , so that the decal is crystal clear. This is especially true of matte finish blanks. Re: Applying decal from Decal Connection
Posted by:
Greg LaPolla
(69.106.136.---)
Date: December 16, 2011 01:01AM
Jim,
By putting down a layer of epoxy first, the edges of the decal will disappear magically. Greg Re: Applying decal from Decal Connection
Posted by:
Michael Sledden
(---.176.42.254.ptr.us.xo.net)
Date: December 16, 2011 06:18AM
I have done it both ways, but I had much better results with a layer of epoxy first. Either way I really didn't see the decal edges after applying finish, but the decal sticks better to the smooth finish of the epoxy. Re: Applying decal from Decal Connection
Posted by:
Dave Loren
(---.prvdri.east.verizon.net)
Date: December 16, 2011 07:16AM
I just applied my peel & stick decals to a rod last night. The blank was a matte gray, and I did put down a base wrap of black thread and did put one finish coat on before decal application. I'm glad I did, the base wrap made the decal really pop. Because the the base wrap was black and after applying the decal I noticed an ever slight edge line around the decal but no problem a black sharpie around the edges and presto line vanished. Magic just like the "Chia Pet". I believe in following the instructions when given to me. Even though we are men and don't follow instructions ( there must be a reason why some one took the time to write the instructions down). Decal Connection does the best job!
Dave Re: Applying decal from Decal Connection
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: December 16, 2011 07:56AM
And we usually don't ask for directions Always know which way to go --- and get lost LOL Bill - willierods.com Re: Applying decal from Decal Connection
Posted by:
matthew jacobs
(---.122.31.71.static.ip.windstream.net)
Date: December 16, 2011 09:30AM
bill boettcher Wrote:
------------------------------------------------------- > And we usually don't ask for directions Always > know which way to go --- and get lost LOL I don't get lost, I simply find new ways to get places. Re: Applying decal from Decal Connection
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: December 16, 2011 09:32AM
I am playing with Christmas lights
I needed a good laugh Thanks Bill - willierods.com Re: Applying decal from Decal Connection
Posted by:
Dave Loren
(---.prvdri.east.verizon.net)
Date: December 16, 2011 07:15PM
NO NO, It's not getting lost it's "EXPLORING" Re: Applying decal from Decal Connection
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: December 17, 2011 10:23AM
Well heck we do like the outdoors LOL Bill - willierods.com Sorry, only registered users may post in this forum.
|