SPONSORS
2024 ICRBE EXPO |
Michigan Rod Builders Round Up
Posted by:
Don Morse
(---.dsl.sfldmi.sbcglobal.net)
Date: December 12, 2011 09:07PM
It’s finally happening!! Michigan’s custom rod builders are now holding their own gathering. The details have just been confirmed and already the response has been very good. According to Rodmaker magazine, they have 350 subscribers in Michigan (No, they did NOT give us any information other than the number of subscribers) and that is probably just the tip of the iceberg. We also promoting the event to anglers that may be interested in finding out what rodbuilding is all about.
Please click Michigan Rod Builders Round Up for more information Please contact me with any questions you may have. ______________________________________ Super Tight Lines......Don Re: Michigan Rod Builders Round Up
Posted by:
Tom Kirkman
(Moderator)
Date: December 12, 2011 09:11PM
Don,
Your only problem will be reaching them. As our recent survey unveiled, only 21% of the rod builders in the U.S. frequent any of these internet rod building forums. If your meeting date is far enough out, I'll be happy to run a press release for you in the earliest possible issue of RodMaker. Send me the details and I'll see what I can do. ................ Re: Michigan Rod Builders Round Up
Posted by:
Don Morse
(---.dsl.sfldmi.sbcglobal.net)
Date: December 12, 2011 09:13PM
I think Mike B. was going to get a hold of you with that information, We are looking at March 24th so we a lot of time. Thanks for your help Tom and thanks for what you do for the rod building community. ______________________________________ Super Tight Lines......Don Edited 1 time(s). Last edit at 12/12/2011 09:35PM by Don Morse. Re: Michigan Rod Builders Round Up
Posted by:
Tom Kirkman
(Moderator)
Date: December 12, 2011 09:15PM
Great. We can do it.
............. Re: Michigan Rod Builders Round Up
Posted by:
Mike Barkley
(---.nap.wideopenwest.com)
Date: December 12, 2011 10:28PM
We're also going to try to reach anglers via tackle shops/fishing forums. who have never been exposed to rodbuilding and introduce them to the craft Mike (Southgate, MI) If I don't want to, I don't have to and nobody can make me (except my wife) cuz I'm RETIRED!! Re: Michigan Rod Builders Round Up
Posted by:
Bill Eshelman
(---.neo.res.rr.com)
Date: December 13, 2011 03:43AM
That`s a good idea Mike. I think I will try that for my nxt one too.
Bill Ohio Rod Builders Canton, Ohio Re: Michigan Rod Builders Round Up
Posted by:
Tony Childs
(---.196.sag.speednetllc.com)
Date: December 13, 2011 07:03PM
Way to go Don, I hope I speak for all Michigan rodbuilders when I say that you have our support, ask for any help you need with this thing. Re: Michigan Rod Builders Round Up
Posted by:
Randy Kruger
(---.cbpu.com)
Date: December 13, 2011 10:50PM
Don, just posted it on FB... and tagged a couple of guys I know... Re: Michigan Rod Builders Round Up
Posted by:
Mike Barkley
(---.nap.wideopenwest.com)
Date: December 14, 2011 12:31AM
Great Randy,I didn't even think about that!! The response so far has been looking VERY good Mike (Southgate, MI) If I don't want to, I don't have to and nobody can make me (except my wife) cuz I'm RETIRED!! Re: Michigan Rod Builders Round Up
Posted by:
Don Morse
(---.dsl.sfldmi.sbcglobal.net)
Date: December 14, 2011 06:19AM
Thanks Randy ______________________________________ Super Tight Lines......Don Sorry, only registered users may post in this forum.
|