I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Matching tip top?
Posted by: Pedro Gomez (---.mia.bellsouth.net)
Date: December 08, 2011 11:04PM

Hi, I am looking for a solid Titanium Gold ceramic tip top tube size 4-4.5 to match AMTAK's GNIA guides. Please advice.

Thanks,

Pedro

Options: ReplyQuote
Re: Matching tip top?
Posted by: bill boettcher (---.dyn.optonline.net)
Date: December 09, 2011 08:24AM

Fuji is the only one that makes a Ti tip top but I don't see any gold rings
You will have to go steel with a gold ring from PacBay or American tackle
[www.mudhole.com]
Or
[www.mudhole.com]
Are all I see ??

Bill - willierods.com

Options: ReplyQuote
Re: Matching tip top?
Posted by: Pedro Gomez (---.mia.bellsouth.net)
Date: December 09, 2011 03:56PM

Thank you Bill. That's what thought. Fuji makes Gold Cermet Titanium guides and tops but they are very hard to find.

Options: ReplyQuote
Re: Matching tip top?
Posted by: bill boettcher (---.dyn.optonline.net)
Date: December 09, 2011 04:09PM

And they are probably Very Costly

Bill - willierods.com

Options: ReplyQuote
Re: Matching tip top?
Posted by: Joe Vanfossen (---.neo.res.rr.com)
Date: December 09, 2011 06:08PM

Pedro,

The last time I used a set of gold ring Amtak Ti guides (GNIC and GNIF), the closet top was the GNHLT. It's a steel top with a flat finish that is very close in color to the Ti frames. Amtak's website lists the model currently as the GNHT. Hope this helps. Even if you don't see it listed on the website, check with one of the Amtak vendors. I'm sure they can get you one.

Hope this helps,

Joe

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster