SPONSORS
2024 ICRBE EXPO |
Corkgrip for 2-handle rods
Posted by:
Kent Petersen
(---.a236.priv.bahnhof.se)
Date: December 01, 2011 09:22AM
My name is Kent and I from Sweden and wright english as I speak it - sorry.
Where can i buy corkgrip for rods from 11f to 18f .Has ben looking on this site and not much discussed about it.Has even hard to find it among the sponsors.I am very thankful for all help I can get. KentP Re: Corkgrip for 2-handle rods
Posted by:
Ken Preston
(---.bltmmd.fios.verizon.net)
Date: December 01, 2011 09:26AM
Om du har tillgång till en svarv eller en borr så är det nog bäst att göra din egen handtag från Cork ringar. Det är lätt att göra och detta sätt kan du få dem valfri längd du vill ha dem. Mudhole säljer också långa kork grepp. Kanske limma två (eller flera) av dessa tillsammans kommer att fungera för dig?
============ If you have access to a lathe or a drill, it's probably best to make your own handles from Cork rings. It is easy to do and this way you can get them any length you want them. Mudhole also sell long cork grip. Perhaps gluing two (or more) of these together will work for you? Edited 2 time(s). Last edit at 12/01/2011 09:32AM by Ken Preston. Re: Corkgrip for 2-handle rods
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: December 01, 2011 09:33AM
Also Batson [www.batsonenterprises.com]
And you can put sections together for longer ones that's cool Ken I am bad with English let alone another language Bill - willierods.com Edited 1 time(s). Last edit at 12/01/2011 09:36AM by bill boettcher. Re: Corkgrip for 2-handle rods
Posted by:
Bob Riggins
(---.se.biz.rr.com)
Date: December 01, 2011 11:26AM
Batson also has switch rod/spey grips that may work for you application. You will need to order through a Batson dealer
[www.batsonenterprises.com] Mudhole carries a variety of grips up to 14 inches. [www.mudhole.com] Re: Corkgrip for 2-handle rods
Posted by:
Jim Upton
(---.lsanca.fios.verizon.net)
Date: December 01, 2011 03:04PM
For long rods you might be thinking of Cork Tape. We use that a lot on jig rods with no reel seat. Re: Corkgrip for 2-handle rods
Posted by:
Charlie Smoote
(---.pn.at.cox.net)
Date: December 01, 2011 08:28PM
Jim Upton Wrote:
------------------------------------------------------- > For long rods you might be thinking of Cork Tape. > We use that a lot on jig rods with no reel seat. Same here. On some personal surf rods, I use coasters with cork tape grips. Simple but efficient. C2 Sorry, only registered users may post in this forum.
|