SPONSORS
2024 ICRBE EXPO |
looking for THAT blank
Posted by:
sergio rimoldi
(---.scansafe.net)
Date: November 27, 2011 11:39AM
Looking for a specific blank, hoping i get some suggestions
Honey finish, 7'6"-8', prefer 1 pc, will tolerate 2, fiberglass, moderate action. will be for kokanee trolling rods. thanks Re: looking for THAT blank
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: November 27, 2011 11:50AM Re: looking for THAT blank
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: November 27, 2011 12:42PM
Sergio,
Check out these crankbait glass rods. One of these will work great. If you want it a different color, paint it. [www.mudhole.com] Roger Re: looking for THAT blank
Posted by:
Bill Stevens
(---.br.br.cox.net)
Date: November 27, 2011 03:18PM
Sergio you are connected to the Internet website needed.
Seeker Rod Company, a sponsor of this forum listed on the left, maintains an extensive listing of high quality blanks that meet your requirements and exceed your expectations. Swampland Tackle, a sponsor of this forum listed on the left, is a full service Seeker Distributor. The text in this link is highly appropriate for the soft mouthed recovery of this prized species - take a careful look at the Legacy Elite 765 - ask for the worksheet that includes build instructions and components necessary to get it to eight feet. This one is not honey color but it is the preferred color of green that the fish appears to favor in lure color. [www.swamplandtackle.com] Seeker has in stock ready for immediate delivery a black kokkanee trolling blank designed specifically to meet your requirements. Use the Contact Us Link for prompt service. [www.swamplandtackle.com] for delivery date and economical pricing. Edited 4 time(s). Last edit at 11/27/2011 04:10PM by Bill Stevens. Re: looking for THAT blank
Posted by:
Bill Stevens
(---.br.br.cox.net)
Date: November 27, 2011 04:20PM
Sergio -
You received feedback from the President of Seeker Rods, Darin Dohi, on a Holiday Sunday. Amazing is the ammount of information that is available in our present cyber world. Darin saw your post on this forum and sent me an email asking me to edit my reply to you and add the specific blank to my post. Seek(er) and Ye Shall Find! Re: looking for THAT blank
Posted by:
Spencer Phipps
(---.war.clearwire-wmx.net)
Date: November 27, 2011 05:13PM
Lamiglas BSP 961, someone should still have some, they were used for steelhead plug rods, they bent pretty deep with a decent fish. Nice light tip for those soft mouthed fish, but enough backbone for gang trolls, etc. I'm thinking. They are honey brown under the black, or maybe you can get some made with no paint if you need quite a few. Todd Vivian at Mudhole would be a good source for further options or advise. Re: looking for THAT blank
Posted by:
Dennis Danku
(---.dyn.optonline.net)
Date: November 28, 2011 11:29PM
Check C U I Products on the left. Dennis J. Danku (Sayreville,NJ) Sorry, only registered users may post in this forum.
|