SPONSORS
2024 ICRBE EXPO |
Finishing a Turks Knote Right
Posted by:
Glenn McMurrian
(---.hsd1.or.comcast.net)
Date: November 17, 2011 11:10PM
For any of you that have ever finished up a wrap with a Turks Head knot what type of finish do you use as I am going to use a Turks Head knot in place of just tying down a Diamond wrap with the standard thread on the end,so again what type of finish do you use as I want to also put some toughness in the knot also. Glenn McMurrian Re: Finishing a Turks Knote Right
Posted by:
kevin knox
(---.baybroadband.net)
Date: November 18, 2011 07:34AM
I use epoxy under the knot and polyeurithane over to of it. Re: Finishing a Turks Knote Right
Posted by:
Mud Hole Custom Tackle
(---.cfl.res.rr.com)
Date: November 18, 2011 09:21AM
For those wondering what a Turks Head Knot is and how to make it, Mud Hole Custom Tackle offers a great jig for those interested in trying this technique out:
[www.mudhole.com] The cord can be purchased at your local hardware shop in main colors. See some examples for turks head knots below: [www.rodbuilding.org] [www.rodbuilding.org] [www.rodbuilding.org] Regards. Team Mud Hole Custom Tackle Web: [www.mudhole.com] Email: sales@mudhole.com Toll Free Phone #: 1-866-790-RODS (7637) Stay Connected with us: FaceBook: [www.facebook.com] YouTube: [www.youtube.com] Instagram: [www.instagram.com] Tik Tok: Tik Tok: [www.tiktok.com] Twitter: @mudholetackle Re: Finishing a Turks Knote Right
Posted by:
kevin knox
(---.baybroadband.net)
Date: November 18, 2011 10:12AM
OR, after you try it for 8 hours and it looks like a terd, you can buy them from me, premade.
I also have the Tuna cord that can't be found in any hardware stores and is the correct cord to use on rods, gaffs and knots. I also have it in 4 different colors (White/green, red/white, all green and all black) Email me if interested. Kevin Edited 1 time(s). Last edit at 11/18/2011 10:14AM by kevin knox. Sorry, only registered users may post in this forum.
|