SPONSORS
2024 ICRBE EXPO |
Polyurethane
Posted by:
Paul Pollaccia
(---.lv.lv.cox.net)
Date: October 13, 2011 02:28PM
Has any one used Mudd Holes polyurethane rod coating? I want to paint a rod blank yellow, it is black now. Can anyone shed light on a good way to do this? Thank you Re: Polyurethane
Posted by:
Andrew Cake
(---.nc.res.rr.com)
Date: October 14, 2011 09:38AM
I bought a can of polyurethane from lowes and it works just as good. It has afast set time so you dont have to wait forever to start building the blank. I havent't had any issues with it. I reccomend atleast 3 coats. Re: Polyurethane
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: October 14, 2011 10:49AM
After a learning curve you would be better off with permagloss or Lumiseal Bill - willierods.com Re: Polyurethane
Posted by:
Andrew Cake
(---.nc.res.rr.com)
Date: October 14, 2011 10:57AM
I've used permagloss, that works great also. Re: Polyurethane
Posted by:
Glenn McMurrian
(---.bvtn.or.frontiernet.net)
Date: October 20, 2011 12:52AM
Yes permagloss thats what has been used before all this other stuff and its still good very good Sorry, only registered users may post in this forum.
|