SPONSORS
2024 ICRBE EXPO |
a little off rod topic, topic?
Posted by:
lorenzo tellez
(---.hsd1.il.comcast.net)
Date: October 05, 2011 01:28PM
I am wondering , I just got a new Quantum smoke reel, and I think it needs some oiling on the roller bearings, I have Qauntum Hot Sauce oil but when I looked it does'nt look like it has that Hot Sauce on the bearings, would it be alright if I just put some Hot Sauce on the bearings , or should I clean the oil that it already has and then reoil the bearings? Re: a little off rod topic, topic?
Posted by:
Russell Brunt
(---.mercymiami.org)
Date: October 05, 2011 01:31PM
You say roller bearing so I have to ask. There is an anti-reverse bearing (to keep the handle from turning backwards) and that should not be oiled.
Clean the other bearings with carb/brake cleaner, air dry, and add your oil of choice. Russ in Hollywood, FL. Re: a little off rod topic, topic?
Posted by:
Dennis Danku
(---.dyn.optonline.net)
Date: October 05, 2011 02:12PM
Send it back! You say its NEW? If it doesn't seem right ,SEND IT BACK. Dennis J. Danku (Sayreville,NJ) Re: a little off rod topic, topic?
Posted by:
lorenzo tellez
(---.hsd1.il.comcast.net)
Date: October 05, 2011 02:15PM
Russell, I have looked at the assembly view of all the parts and don't see a anti-reverse bearing listed, can you tell me where it would be or if there is another name for it? Thank you, for the info, i just cannot find that anti reverse bearing,I sure don't want to accidently oil that one. Re: a little off rod topic, topic?
Posted by:
lorenzo tellez
(---.hsd1.il.comcast.net)
Date: October 05, 2011 03:31PM
Why should I send it back, it works great! i just need to know what to oil, Thanks All! Re: a little off rod topic, topic?
Posted by:
Greg Marshall
(---.northropgrumman.com)
Date: October 05, 2011 03:48PM
Anit-reverse bearing will be located on top of the drag stack and underneath the star drag. It is not like the other bearings in the reel although it is often given credit as an additional bearing (i.e, 7 bearing system, 8 bearing, etc.) The shaft for the handle goes through it and it is usually pressed into the side plate to become an integral part of the side plate. Don't oil it . It should have come with enough grease to last a lifetime. When using oil on other roller bearings, don't use much. A drop is all that is needed. Many a reel has been hosed up by too much oil and grease. Re: a little off rod topic, topic?
Posted by:
lorenzo tellez
(---.hsd1.il.comcast.net)
Date: October 05, 2011 04:08PM
Thanks , I found it, its all good now, can't wait to go fishing! Tight lines! Sorry, only registered users may post in this forum.
|