SPONSORS
2024 ICRBE EXPO |
rod finnish temperture
Posted by:
Paul Pollaccia
(---.lv.lv.cox.net)
Date: September 20, 2011 09:44PM
Can you apply flex coat rod finish epoxy when the temperature is in mid 60,s? Will it setup? Thank you Re: rod finnish temperture
Posted by:
Raymond Adams
(---.hsd1.ca.comcast.net)
Date: September 20, 2011 10:01PM
Short answer..YES Raymond Adams Eventually, all things merge, and a river runs through it.. Re: rod finnish temperture
Posted by:
David Dosser
(---.columbus.res.rr.com)
Date: September 20, 2011 10:21PM
I did it last year when I had to work in a room with no heat. I used a heat gun to warm it to release the bubbles and then put it in the drier. I put a little heat to it after I had it turning and then let it turn overnight with no issues. David Dosser Coshocton, OH Re: rod finnish temperture
Posted by:
Rufus Rhoden
(---.248.169.130.nw.nuvox.net)
Date: September 21, 2011 04:03PM
Will take longer to set but will set Rufus Port Saint Lucie, FL Sorry, only registered users may post in this forum.
|