SPONSORS
2024 ICRBE EXPO |
reel seat ( aluminum or graphite)
Posted by:
Paul Pollaccia
(---.lv.lv.cox.net)
Date: September 08, 2011 10:42PM
I would like to use the fuji reel seat 22 mm, for my rod build, will this reel seat hold up on a 20 to 30 pound class rod. ? Thank you in advance. Re: reel seat ( aluminum or graphite)
Posted by:
Raymond Adams
(---.hsd1.ca.comcast.net)
Date: September 08, 2011 10:53PM
Yes Raymond Adams Eventually, all things merge, and a river runs through it.. Re: reel seat ( aluminum or graphite)
Posted by:
Ian Miller
(---.lnk.telstra.net)
Date: September 09, 2011 01:59AM
FPS seats are one of the most robust and will take 30lb no problem. I haven't had a FPS-22 fail in decades of using them, and have designed many production rods with H22, D22 and SD22 seats for #30 and heavier that have never had a strength issue in the Australian market which is tough on tackle! USe with confidence Paul.
Ian Re: reel seat ( aluminum or graphite)
Posted by:
Col Chaseling
(---.lns13.ken.bigpond.net.au)
Date: September 09, 2011 06:51AM
Hi Mr Miller,
Ian, great to see some involvement by you on this forum. Your rodbuilding exploits are legendary in this country and anything you've got to say, on any topic, should be well noted by everyone. Hope to see more of your comments and please don't give up your distribution of Rodmaker magazine in this country!!!! ESFNEM Col Port Kembla, NSW Australia Re: reel seat ( aluminum or graphite)
Posted by:
Ken Preston
(---.bltmmd.fios.verizon.net)
Date: September 09, 2011 08:12AM
Ian -
Nice to see you here. Re: reel seat ( aluminum or graphite)
Posted by:
Russell Brunt
(---.mercymiami.org)
Date: September 09, 2011 08:31AM
I have a confession to make. I stayed with graphite seats for a long time now due to problems with metal seats back in the day.
Yesterday a parts shipment arrived with an aluminum reel seat (black). I have to admit it looks so much nicer that I'm asking the client to stop by and take a look before I put a graphite seat on his rod. I like the aluminum ball gimbal too:) Always went with the graphite fuji gimbal too. I'm going to have to invest in a scale. Russ in Hollywood, FL. Re: reel seat ( aluminum or graphite)
Posted by:
Get Bit Outdoors.Com
(---.se.biz.rr.com)
Date: September 09, 2011 06:35PM
Absolutely, graphite seats are much tougher than they look. We use DPSD20's on our tarpon spinners and put the heat on them with 50lb braid. Tight Lines and Bull's-eyes, Get Bit Outdoors 407-542-7840 www.GetBitOutdoors.com www.facebook.com/GetBitOutdoors Re: reel seat ( aluminum or graphite)
Posted by:
Tom Kirkman
(Moderator)
Date: September 10, 2011 08:03PM
If you still have any doubts, keep in mind that there are heavy duty nylon/graphite boat rod seats available as well.
............... Re: reel seat ( aluminum or graphite)
Posted by:
Paul Pollaccia
(---.lv.lv.cox.net)
Date: September 10, 2011 09:18PM
I just ordered the Fuji heavy duty graphite reel seat, and the fuji gimbal. I will give them a try thanks guys. Sorry, only registered users may post in this forum.
|