SPONSORS
2024 ICRBE EXPO |
Tacky guide wraps
Posted by:
Herb Knowlton
(---.dhcp.bycy.mi.charter.com)
Date: September 06, 2011 09:36PM
I touched up some guide wrap finish that I wasn't satisfied with, and the touched up areas are still tacky after two days. I am sure it is a problem with the 50/50 mix as I only did a small volume. My question is: What do I need to do to these wraps so I can apply a new mix?
Thanks, Herb Re: Tacky guide wraps
Posted by:
Brandon Gay
(---.dsl.crchtx.sbcglobal.net)
Date: September 06, 2011 09:55PM
I do 3cc's all the time with no issues. I do use syringes though. 1.5cc each. Someone may chime in with a fix solution. I have in the past had tacky butt wraps and just coated over them with success. Re: Tacky guide wraps
Posted by:
Phil Erickson
(---.dsl.sfldmi.sbcglobal.net)
Date: September 06, 2011 10:25PM
Another coat (properly mixed) should fix the problem. Re: Tacky guide wraps
Posted by:
Randy Fry
(---.hsd1.ca.comcast.net)
Date: September 06, 2011 11:26PM
I have had the same problem at times and I always coat over it and they always turn out fine.
Randy <*((((>< Re: Tacky guide wraps
Posted by:
Get Bit Outdoors.Com
(---.se.biz.rr.com)
Date: September 07, 2011 12:46PM
You'll be fine with another coat. Tight Lines and Bull's-eyes, Get Bit Outdoors 407-542-7840 www.GetBitOutdoors.com www.facebook.com/GetBitOutdoors Sorry, only registered users may post in this forum.
|