SPONSORS
2024 ICRBE EXPO |
What color thread for anodized blue?
Posted by:
Gary Snyder
(---.fort-lauderdale-04rh15-16rt.fl.dial-access.att.net)
Date: August 30, 2011 02:11PM
I know that garnet Gudebrod w/color preserver looks like anodized red aluminum when finished, but what color thread do I want to match an anodized blue reel? No underwraps or metallics please. Re: What color thread for anodized blue?
Posted by:
mike harris
(---.cluster-h.websense.net)
Date: August 30, 2011 03:55PM
I can’t help with a non metallic selection, but Sulky Metallic Peacock Blue is the most beautiful blue I have ever worked with, I use more than any other color. Another thing to keep in mind is that all blue anodizing is not the same, the company I used to work for sold a lot of anodized aluminum parts and the batch to batch consistency was always a problem, you may need a completely different color blue to match the reel you have compared to someone else’s blue reel. Re: What color thread for anodized blue?
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: August 30, 2011 04:07PM
The only thing in that case is to buy all the blues and this way you have them on hand if needed Bill - willierods.com Re: What color thread for anodized blue?
Posted by:
Gary Snyder
(12.77.249.---)
Date: August 30, 2011 05:38PM
Mike, what would you say is the closest to the peacock blue in a non-metallic? Re: What color thread for anodized blue?
Posted by:
mike harris
(---.dhcp.sffl.va.charter.com)
Date: August 30, 2011 10:49PM
No idea, I only use metallic thread. Re: What color thread for anodized blue?
Posted by:
Spencer Phipps
(---.war.clearwire-wmx.net)
Date: August 30, 2011 10:52PM
If I remember right peacock blue is available in the rayon, sliver and metallic. Re: What color thread for anodized blue?
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: August 30, 2011 11:17PM
Pick up a half dozen blue thread colors.
Do some test wraps on blanks and then wet the finish with DNA to get a feel for what the thread will look like when the finish is applied and dry. Use the samples to get the match that you need. Good luck Roger Re: What color thread for anodized blue?
Posted by:
Gary Snyder
(---.fort-lauderdale-04rh15-16rt.fl.dial-access.att.net)
Date: August 31, 2011 07:09PM
Yes, peacock is available in non-metallic, I see that now. Azul also seems to be a similar color.
All your posts were helpful, thanks guys. Sorry, only registered users may post in this forum.
|