SPONSORS
2024 ICRBE EXPO |
Rod suitable for pike and carp
Posted by:
Chad Huderle
(---.static.twtelecom.net)
Date: August 26, 2011 11:06AM
I've got a build coming up and the customer wants something that will handle northern pike and carp that can be up to 20 lbs. The carp he targets are below a nearby dam and he uses 2oz+ egg sinkers to get the bait to the bottom and keep it there.
I only use Batson blanks and the blank I'm considering is the IMB846. I was considering one of the hotshot blanks but 7' is as long as the customer wants to go and the hot shots start a 7'6". Anyone else have a different recommendation other than the IMB846? Thanks, Chad Huderle Huderle Custom Rods Prior Lake, MN Re: Rod suitable for pike and carp
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: August 26, 2011 11:41AM
Chad,
I would just buy any medium heavy blank in a length that is suitable for the client. If you want to go with the hot shot blank that is 7'6", buy it and chop 6 inches off of the butt of the rod. Easy solution on a great blank. Roger Re: Rod suitable for pike and carp
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: August 26, 2011 11:42AM
p.s.
The idea of using a hot shot blank is a very good idea when targeting these fish. Often, big carp can be very very soft biters. As a result, the use of a rod with a softer tip often result in more fish. This is the case with most of the hot shot blanks. i.e. lighter tips with heavier mid and butt sections. Roger Re: Rod suitable for pike and carp
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: August 26, 2011 11:44AM
p.s.
If you do decide to go with a hot shot blank for this rod, and need to cut it; Don't chop off any of the tip. You need to keep all of the light tip for bite detection. Chop any extra length from the butt of any of these blanks. Roger - Re: Rod suitable for pike and carp
Posted by:
Chad Huderle
(---.static.twtelecom.net)
Date: August 26, 2011 12:24PM
I was considering the HS932 and chopping the 9" off the butt but that would slow down the extra fast tip and lower the power.
The HS932 is 7'9". After a little discussion about pros and cons he is okay with the extra length after I explained he'll get more casting distance plus that blank is about 21% lighter than the IMB846. Thanks, Chad Huderle Huderle Custom Rods Prior Lake, MN Re: Rod suitable for pike and carp
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: August 26, 2011 12:48PM
I am seeing several that are stated to handle 3 - 4 oz at 7' 1 pc and 2 piece Your doing 2 plus sinkers and bait
Batson should have many MHX lamiglass Bill - willierods.com Re: Rod suitable for pike and carp
Posted by:
Chad Huderle
(---.static.twtelecom.net)
Date: August 26, 2011 01:06PM
Thanks Bill.
I didn't state it very clearly but he uses two1 oz sinkers and the bait is just a clump of oatmeal on a hook. The HS932 is rated for 1/2 to 2 1/2 oz. plus it possesses the extra fast tip. I've never built one of the HS blanks yet so I'm hoping its AA is 78 - 80. Thanks, Chad Huderle Huderle Custom Rods Prior Lake, MN Re: Rod suitable for pike and carp
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: August 26, 2011 01:21PM
Chad,
Chopping 9 inches off of the butt of the rod, will NOT change the softness and sensitivity of the tip. Sure you lose a bit of power, but so what. The blank will still have plenty of power to land the fish being caught. Roger Re: Rod suitable for pike and carp
Posted by:
Chad Huderle
(---.static.twtelecom.net)
Date: August 26, 2011 01:34PM
Roger,
Thanks for the input but I have to disagree. Shortening a rod from either the tip or the butt will change the action of a blank. If that's what you refer to as softness and sensitivity of the tip. To what degree largely is dependent on the blank being discussed. Since the HS blanks possess what Baston terms an extra fast tip it may be more negligible, but it will be slightly slower. I know this to be true because I have tested it myself on other blanks. Thanks, Chad Huderle Huderle Custom Rods Prior Lake, MN Edited 1 time(s). Last edit at 08/26/2011 01:36PM by Chad Huderle. Re: Rod suitable for pike and carp
Posted by:
Duane Richards
(---.hfc.comcastbusiness.net)
Date: August 26, 2011 01:45PM
Chad,
I'd look at the: IMB845 Matte Clear 7'0" 1 14-25lb. 3/8 - 2oz. 0.620 6.5 Fast Mag-Heavy 3.08 oz. jig & pig / pitching plastics in and around heavy cover I've built several of these for Striped Bass fishermen and it's very capable. DR Re: Rod suitable for pike and carp
Posted by:
Anonymous User
(---.dsl.chcgil.sbcglobal.net)
Date: August 26, 2011 01:50PM
What about Mud Hole MHX FS966T-MHX Telescopic, this blank will aid in casting being 8' and will go down to 7' for storage, will handle 2oz baits and 20lb Pike or Carp. I have this blank and just love it for Pike that I fish for in Canada. Re: Rod suitable for pike and carp
Posted by:
Chad Huderle
(---.static.twtelecom.net)
Date: August 26, 2011 02:01PM
Duane, that's a great blank too. I just finished a pike rod for another customer last month using that blank. Thanks, Chad Huderle Huderle Custom Rods Prior Lake, MN Re: Rod suitable for pike and carp
Posted by:
Chad Huderle
(---.static.twtelecom.net)
Date: August 26, 2011 02:07PM
Richard,
Thanks for the recommendation. I've read only good reviews on the MXH sticks but I stick with Batson blanks for two reasons. One, they're excellent blanks and a great value and two, I live just down the street from from one of our vendors on the left, Midwest Rod and Reel. Al and Bill carry the Batson line of blanks and treat me great and I don't ever have to deal with shipping charges. Doesn't get much better than that! Thanks, Chad Huderle Huderle Custom Rods Prior Lake, MN Re: Rod suitable for pike and carp
Posted by:
Russell Brunt
(---.mercymiami.org)
Date: August 26, 2011 03:36PM
Keep in mind on most hot shot blanks the listed weight is a trolling weight, NOT a casting weight. I would say casting two ounces with a two power hot shot blank is pushing the limit. I have a three power baston in 8'6" (HS1023F) and two ounces is more than I would want to cast on it. It will cast one ounce a mile though so maybe he won't need two ounces. Russ in Hollywood, FL. Re: Rod suitable for pike and carp
Posted by:
Chad Huderle
(---.static.twtelecom.net)
Date: August 26, 2011 04:15PM
Thanks Russell, good info to know. Thanks, Chad Huderle Huderle Custom Rods Prior Lake, MN Re: Rod suitable for pike and carp
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: August 26, 2011 11:24PM
Chad,
As I said in my original post chopping a blank WILL change the power and action, depending on whether it is taken from the butt or the tip. My only put on this particular blank for this particular action - the tip and its ability to nicely bend is a great asset in getting a visual indication of a light carp bite. So, don't cut any of it off. If, you end up cutting 9 inches off of the butt, as I said earlier, will end up reducing the power. BUt, even for big fish, the power reduction will be still be sufficient to easily land the fish. So, absolutely correct on your part - chopping a blank changes the power and or action or both. I have simply suggested that for the type fish that you are catching, you don't want to destroy any of the tips ability to easily bend and telegraph the light bite visually to the fisher person. All of the other blank suggestions are very good as well. Rpoger Sorry, only registered users may post in this forum.
|