SPONSORS
2024 ICRBE EXPO |
Tip for a down rigger
Posted by:
Tristan Batho
(---.118.dsl.syd.iprimus.net.au)
Date: August 13, 2011 07:47PM
Hi my mate was thinking of turning his broken jig stick into a down rigging pole he was wondering if there is a tip that swivels cheers Re: Tip for a down rigger
Posted by:
Fred Cory
(---.nc.res.rr.com)
Date: August 14, 2011 12:13AM
Aftco makes a swivel tip - I use them for my Planer rod and for my Dredge Teaser rod. Re: Tip for a down rigger
Posted by:
Tony Childs
(---.196.sag.speednetllc.com)
Date: August 14, 2011 08:50AM
Torpedo makes a better swivel tip for half the cost. It has a #6 SIC guide on the incoming side of the roller as well as the exit guide. Do a search for "Torpedo Tip" or "Torpedo Wire". The company that makes Torpedo Trolling Wire makes the tip. Re: Tip for a down rigger
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: August 14, 2011 11:56AM
Tristan,
Be careful of what you use for a downrigger rod. Depending on your applicaiton, you generally want a down rigger rod to be of glass and to be able to take about a 90 degree bend to be able to be well loaded all of the time on the rigger and to be able to snap up to set the hook and take out slack line when a fish hits. Good fishing. Roger Re: Tip for a down rigger
Posted by:
billy broderick
(---.scr.east.verizon.net)
Date: August 14, 2011 07:52PM
Tony good stuff. I just ordered 3 to have in my shop. I like the design hope they are as nice as they look. Re: Tip for a down rigger
Posted by:
Tony Childs
(152.72.151.---)
Date: August 15, 2011 01:51PM
No problem, I use them for wireline applications. They are great to work with, and will even do "custom" ring inserts for nominal fees. The only problem is that they are in Ontario and shipping is high for a single tip, so like you I tend to order them in numbers. They are very nice looking, almost impossible at a glance to tell that they aren't an Aftco, maybe slightly bulkier, maybe. The other bummer is that you can't use one with a spiral wrap. I have bugged them a few times, but they don't seem to be interested in coming up with anything like that. Something about not being enough demand for it????LOL Sorry, only registered users may post in this forum.
|