SPONSORS
2024 ICRBE EXPO |
Finish/Air Conditioning
Posted by:
Bruce Tomaselli
(---.altnpa.east.verizon.net)
Date: July 14, 2011 06:52PM
I have always hesitant to apply rod finish in the heat and humidity of summer because I'm afraid it won't harden. I do mine in the fall and winter. Can I apply finish in an air conditioned apartment? Re: Finish/Air Conditioning
Posted by:
Thomas Kaufmann
(---.nmci.usmc.mil)
Date: July 14, 2011 06:59PM
YOU BET!!! I have done 6 this week with ZERO problems.. Only thing that might be a problem could be something like permagloss or lumiseal.
Tom Re: Finish/Air Conditioning
Posted by:
James Newsome
(---.244.204.207.client.dyn.strong-sf33.reliablehosting.com)
Date: July 14, 2011 07:11PM
Why did the quote disappear? Anyway, humidity will not affect it. Warmer weather speeds up the cure and colder weather slows it down. I apply finish in an air conditioned area all the time and get great results. Just my .02. Re: Finish/Air Conditioning
Posted by:
kevin knox
(---.ec.res.rr.com)
Date: July 14, 2011 09:46PM
I apply finish to rods almost every day of the year and have absolutely no issues. That said, if you get a NEW AC system or ducting in your house, be careful as new units that are not fully broken in will emit molecules of oils and silicones from the motor unit. I found out the hard way that it happens.
Long answer short, finish away in the AC and enjoy the comfortable temps. Re: Finish/Air Conditioning
Posted by:
Barry Thomas Sr
(---.hsd1.nj.comcast.net)
Date: July 14, 2011 09:56PM
My cave air cond the last week of 90's did not fase epoxy Re: Finish/Air Conditioning
Posted by:
Barry Thomas Sr
(---.hsd1.nj.comcast.net)
Date: July 14, 2011 09:56PM
My cave air cond the last week of 90's did not fase epoxy Re: Finish/Air Conditioning
Posted by:
Phil Brenner
(198.217.64.---)
Date: July 15, 2011 05:04AM
About a half hour before i start to finish, i set the AC fan to ON instead of AUTO to prevent any dust from being stirred up when the system first kicks on. Re: Finish/Air Conditioning
Posted by:
Owen Spalding
(---.dsl.vic.optusnet.com.au)
Date: July 15, 2011 05:41AM
epoxy cures with a chemical change and is not weather affected at all....raining,sunny, damp, frosts, hurricanes, humidity, doesn't matter one iota...... Re: Finish/Air Conditioning
Posted by:
Chuck Mills
(---.grenergy.com)
Date: July 15, 2011 08:53AM
Owen Spalding Wrote:
------------------------------------------------------- > epoxy cures with a chemical change and is not > weather affected at all....raining,sunny, damp, > frosts, hurricanes, humidity, doesn't matter one > iota...... Well, sort of. If there is frost in your shop it will take a while. ;) _________________________________________ "Angling is extremely time consuming. That's sort of the whole point." - Thomas McGuane Re: Finish/Air Conditioning
Posted by:
Bruce Tomaselli
(---.altnpa.east.verizon.net)
Date: July 15, 2011 06:06PM
Thanks, guys. I'm learning so much from you and thanks for your patience with all of my questions.
Bruce Re: Finish/Air Conditioning
Posted by:
Tom Kirkman
(Moderator)
Date: July 15, 2011 07:43PM
For every 20F increase or decrease from about 70F, the epoxy set and cure time will either halve (20F increase) or double (20F decrease). Humidity makes no difference.
.............. Re: Finish/Air Conditioning
Posted by:
kevin knox
(---.baybroadband.net)
Date: July 16, 2011 06:59PM
Chemical reaction or not, the molecules int he chemical move faster in warm rooms and slower in cold rooms. Sorry, only registered users may post in this forum.
|