SPONSORS
2024 ICRBE EXPO |
Plate seat orientation for surf rod
Posted by:
Mike Canavan
(---.nys.biz.rr.com)
Date: July 13, 2011 09:56AM
Wrapping a Fuji plate seat on a surf rod, just wondered if there is a preferred slide up/down orientation?
Thanks! Mike Re: Plate seat orientation for surf rod
Posted by:
Tom Kirkman
(Moderator)
Date: July 13, 2011 10:36AM
I put the moving plate hood to the front, fixed hood to the back. Same for spinning and casting. Although it'll work either way so it's a matter of personal preference.
When Fuji first developed this style seat, it was an integral part of a nylon spinning seat. The fixed hood was the to rear, the moving plate hood to the front. .......... Re: Plate seat orientation for surf rod
Posted by:
Mike Canavan
(---.nys.biz.rr.com)
Date: July 13, 2011 11:13AM
Thanks Tom - appreciated.
Thanks again for the cork tape removal tip too - worked like a charm! Have a great day, Mike Re: Plate seat orientation for surf rod
Posted by:
Barry Thomas Sr
(---.hsd1.nj.comcast.net)
Date: July 13, 2011 01:31PM
X2 Sorry, only registered users may post in this forum.
|