SPONSORS
2024 ICRBE EXPO |
Question about epoxy finish
Posted by:
Richard Beecher
(---.dhcp.hlrg.nc.charter.com)
Date: June 15, 2011 09:40AM
This may sound weird but I'm wondering if it's possible to create a flat finish (non-glossy) when epoxying guides? Re: Question about epoxy finish
Posted by:
Tom Kirkman
(Moderator)
Date: June 15, 2011 10:29AM
The only thing I can think of would be to obtain some "flattening agent" from an automotive paint supplier and try that. Otherwise, apply the epoxy, let cure and then lightly scuff with fine Scotchbrite.
............. Re: Question about epoxy finish
Posted by:
Get Bit Outdoors.Com
(---.sip.mco.bellsouth.net)
Date: June 15, 2011 01:40PM
Interesting concept and after thinking about it, it may look really slick on a matte blank. Let us know what you end up doing and how it turns out. Tight Lines and Bull's-eyes, Get Bit Outdoors 407-542-7840 www.GetBitOutdoors.com www.facebook.com/GetBitOutdoors Re: Question about epoxy finish
Posted by:
Ken Preston
(---.bltmmd.fios.verizon.net)
Date: June 15, 2011 01:56PM
Krylon "Flat Matte" or Testor's DullCoat should work Re: Question about epoxy finish
Posted by:
Chris Beverley
(---.infinity.net.au)
Date: June 21, 2011 05:44PM
Richard, any luck with this? Sorry, only registered users may post in this forum.
|