SPONSORS
2024 ICRBE EXPO |
Lew's graphite handles
Posted by:
Terry Kirk
(---.ks.ks.cox.net)
Date: May 26, 2011 03:47PM
Do any of the sponsors have any Lew's speedstick graphiteTennesee tube handles laying around to sell. I can't find any on the sites but not sure if I was looking in the right spots? Thanks for any help. Re: Lew's graphite handles
Posted by:
Scott Nordlund
(---.sub-174-253-148.myvzw.com)
Date: May 26, 2011 09:36PM
Pardon my ignorance, but is there a significant difference between what you're looking for and the graphite/carbon fiber tubes that Mudhole sells (among others) ?
Just curious. Re: Lew's graphite handles
Posted by:
Tom Kirkman
(Moderator)
Date: May 26, 2011 10:05PM
The Lew's kits included 3 arbors and end cap. If that makes any difference.
The earliest Lew's kits featured the swirled carbon tube. The latter ones were straight, smooth tubes with the Lew's logo on them. ....... Re: Lew's graphite handles
Posted by:
Terry Kirk
(---.ks.ks.cox.net)
Date: May 27, 2011 06:09AM
I do use the tubes from the sponsors but I saw a very very nice Shikari with the swirled tube handle and liked the uniqeness of it and thought if there were any around I would like to build one for myself. Just something different. Thanks Tom, I did not know that there were straight handles from Lew's. I had only seen the swirled one. Re: Lew's graphite handles
Posted by:
Tom Kirkman
(Moderator)
Date: May 27, 2011 09:39AM
The swirled one was the earlier version. These might be hard to come by, although perhaps not impossible.
................ Sorry, only registered users may post in this forum.
|